Review on 🚗 Enhancing Vehicle Protection with TCP Global Undercoating Spray Suction by Zach Sornsin

I had a Rustoleum Truck Body Coating that was about 2 years old and I sprayed it on. I finished it, bought a new can and found that the product has changed for the better. The new product isn't as clumpy and smells as bad as the old one, and it sprays a lot smoother. This syringe did very well with new things, but not so well with the old version. I mention this because a few reviewers didn't like this coated gun, but those reviews are older and the product appears to have changed. It may feel a bit clumpy when first sprayed, but once dry it is very smooth and leaves a nice texture. I used 90-100psi from a DeWalt portable compressor and it handled it with no problem. I would recommend using disposable bags (I got a 10 pack from Harbor Freight) as they make cleaning easier. I'm glad I tried this gun as the duvet is quite thick and it handled well. It sprays it fairly quickly and it empties the canister in just a few minutes. I removed the dried area of the coating, after drying it was not very thick. I used about a half gallon of primer to coat the trailer but I needed 3 gallons of Rustoleum Truck Bed Liner Primer. When cleaning the gun with this product, use acetone as paint thinner/white spirit will not dissolve these substances. A quick acetone spray cleaned it on the inside and a quick rub on the outside and it was good.