Review on 📏 1-Inch Curtain Rod with Round Finials - 1-Pack, Adjustable 36 to 72 Inch Length, Nickel Finish by Jeremy Stephens

These are very good for the price as long as they feel pretty solid and look nice. The people who complain that the instructions provided don't match the hardware and the screws don't fit are WRONG (well, half wrong, the pictures of the mounts don't show what you get but the screws they give you match the brackets you received just fine, just install them correctly), first decide where you want to install the brackets, and then take the brackets and attach them to the desired location on the wall, and then clearly mark them at the TOP of each hole/slot for screws (I've posted a picture showing where you need to have the marks), do this for each bracket you will be using, then place the brackets aside. The instructions say to drill the holes first and most professionals will say the same, this way you don't risk damaging the screws. Just make sure the bit you are using is the correct size Follow the instructions and just looking at it made sure the bit was a bit shorter than the screws and a bit narrower. Now drill holes in each location you marked once you have the holes in place, then screw in the screws (using your fingers or a screwdriver). not complete, leave a little space between the wall and the screw head, then take the brackets and fix them on the wall just above the screws, then you can press the bracket and the screws will snap, also the bottom one, the Der Space for the bottom screw is tighter next to the top one, so you may have to screw more or less into the wall to attach the brace, then tighten all the screws. I use a screwdriver instead of other ate so as not to accidentally cut the screws. And so each bracket is attached with TWO screws.