Review on Intelligent charger Liitokala ND-4 by Stanislaw Kesicki ᠌

It's time for the seller to correct the bundle - there is no car adapter. Now about the modes (in the instructions is not a very accurate description). General : You can only set the charging current level (300, 500, 700 and 1000mA) while the mode type is flashing. The discharge current is always 500 mA. At the end of work in all modes, END is displayed and the readings on this slot are fixed, they can be read by pressing the slot number button several times. All modes end with a battery charge. 1. CHARGE. There is a charge up to a voltage of 1.47-1.49 V. With this mode, I think can only be used when the battery is discharged below 1.0V, otherwise, the memory effect begins to take effect. 2. DISCHARGE. There is a discharge to about 1.0 V, a pause of 20 minutes, a charge. I think it's - main charge mode. 3. RECOVERY. Charge, discharge, pause, charge, and so on until capacity will stop growing. On high-capacity batteries, this procedure may continue for several days. Example: Energizer batteries (2400mAh) were restored from 1400 mAh to 2100 mAh in two days. need patiently wait until END is displayed. 4. TEST. Charge, discharge, pause, charge. Doubtful mode, because it starts with a charge. You can estimate the battery capacity using mode 2. Thus, the DISCHARGE and RECOVERY modes are basic and sufficient when using this device.