Review on Cooler Deepcool AK620 WH by Janis Berzins ᠌

Name: Cooler Deepcool AK620 WH
Item: Cooler Deepcool AK620 WH
Rating: 4

June 05, 2023

The product is of good quality, there is only one minor defect.

Worth your money.
The ryzen 2700x was on a wraith prism amd with a tdp of 105. It was noisy like hell, the percentage was warming up to 60-67.

I put a tower - it doesn’t reach 60. Rust has a maximum of 59.
In idle time it was 40-44, with the tower colder than me - 30-32.

Turntables are quiet. Very.

There is a strange desire to put the 3rd cooler blown from the processor, simply because 1A on the power supply still allows you to fit a couple of turntables.

Pros

Packaging, equipment, design, silence (seriously very quiet fans), plugs for the top parts of the tower, price A separate plus for the splitter for two turntables included.

Cons

1. To add RAM, you will have to remove the tower. The gskill trident z neo 32 RAM with a high heatsink is ok, there is another 2 mm above it. 2. Installing a tower is hell. The included screwdriver is inconvenient. 3. If you have over the mat. Since there is not enough space on the motherboard, you will not be able to tighten the top center screw if you install the motherboard with the Tower already installed. 4. If you have point 3, there will not be enough space for the turntable to blow up. (I have zalman s2) 5. Thermal paste is included, there is no information about non-conductivity. It makes no sense to take lower than mx4 with 8.5 conductivity. 6. For perfectionists - in the picture we see perfectly parallel 2 towers and a cooler in between. In fact, they do a little V. Not a perfect fit. When you put the cooler between, they look a little to the sides.