Review on 🚂 Powerful Kleinn Air Horns GMTRK-1 Bolt-On Train Horn for Enhanced Safety & Attention-Grabbing Sounds by Blake Mannasseh

Really like this horn. It's very noisy and very well built BUT. when everyone says it's easy to install. it is not so easy. I recently installed this kit on my 2018 Silverado and it took about 5-6 hours. The instructions that came with it were practically useless. I was able to watch a few YouTube videos on some of the earlier models for advice and a better explanation. Be sure to assemble the entire horn assembly, solenoids, and air fittings prior to installation. Horn does not attach as shown in instructions and video for 2018 model. They say the horn is pointing to the passenger side. no In order for it to fit properly, the horns must face the driver's side. The installation as shown in the book does not work in 2018, part of the bumper gets caught in the horn. Please assemble the whole compressor before installation. Do not install the plate first and then try to install the compressor and tank, it will not work. You can't get your hands in there to install it. Build first, then install. I was only able to get 3 screws in because it was too tight to fit my hands under, but I got it working with 3 screws and it's tight enough. The hardest part for me was installing the compressor, but other than that, once everything is in place, just connect the air lines and 12v power supply and you're good to go. If you don't deal with this vehicle on a regular basis, it's a tricky setup, but well worth it. I recommend these beeps to everyone, but be prepared to be tested.