Review on 💡 reiga 52-in Silver Ceiling Fan: Dimmable LED Light Kit, Remote Control, Modern Blades, Reversible DC Motor, 6-Speed, Timer by Dana Franklin

The ceiling fan looks nice on the ceiling and is generally not too difficult to install. I have 9 foot ceilings so I used a 6 inch bottom rod. One problem with using a 6" bottom bar is that the height of the canopy, canopy lock and connector cap is about 6" so it was too difficult to wire connections to the bottom bar hanging in the hanger during installation . I used a 6 foot ladder with three 5 gallon buckets nested inside to support the fan without the bottom bar in the hanger bracket. I was able to make the connections and then insert the bottom bar into the hanger. If you have 10 foot ceilings, use a 10 foot ceiling. "bottom bar and you have enough space with the bottom bar in the hanger when you make the connections. Another big issue for me is that the light comes on when the fan turns on after the power is off for a few seconds so if you have a wall switch that turns the power on and off and you turn off the fan it will turn on when you turn on the power regardless of your lights settings also means that if you put your baby down when you go into the Going to bed and you have a momentary power outage the light will turn on at night and probably wake up your baby Another issue is the lighting set The thing is bright Also the light seems to be made up of 3000k, 4000k and 6000k leds, what makes the combination This light is very similar to daylight (5000k) I have unplugged the light kits while looking for a light kit that is around 3 Costs 000,000.. Installation tip: As I read in one of the comments that someone had trouble inserting the remote control receiver into the hood, it is better and easier to store. into the hanging bracket as shown in the last picture.