Review on Variegated Gold Leaf Sheets | Barnabas Blattgold | Red Color | Set of 25 Sheets | 5.5 inches Booklet by Jessica Lewis

I have an Ibanez Jem and the guards are all the same. I wanted something unique and custom shin guards cost a fortune. So I got this speckled gold leaf and used it to coat my guitar's plain white pickguard. These sheets are SUPER thin and fall apart very easily so you have to be careful. There are many sheets in one package to make this, so I made a truss rod cover, a tremolo cover, and a rear input port cover. There are tricks! You have to sand the protection and covers to scratch them (easily), so that the sheet will hold on to something and not slip. Received - Multipurpose Adhesive 3M Scotch Super 77, 4.37 oz., Clear - Spray gently, allow to dry so it will be tacky to the touch. Place the sheets of paper over any parts you are covering, then CAREFULLY rub the sheet into the adhesive with a damp, smooth cloth. If you rub the sheet hard, it will tear. Let it dry for about 2 days until it becomes soft. Then, before trimming off the excess sheet, coat it with - Krylon K01303007 11 oz. Crystal Clear Acrylic Spray Spray - . Let roast all day. Then gently rub your index finger over the edges of the sheet that hang over the edges of the covered pieces. It's not as easy as it seems. A friend of mine tried and ripped the sheet after the glue dried, almost a disaster. We just started the whole process from the beginning. Have fun and look for other leaf colors, there are many here. let dry so it is sticky to the touch. Place the sheets of paper over any parts you are covering, then CAREFULLY rub the sheet into the adhesive with a damp, smooth cloth. If you rub the sheet hard, it will tear. Let it dry for about 2 days until it becomes soft. Then, before trimming off the excess sheet, coat it with - Krylon K01303007 11 oz. Crystal Clear Acrylic Spray Spray - . Let roast all day. Then gently rub your index finger over the edges of the sheet that hang over the edges of the covered pieces. It's not as easy as it seems. A friend of mine tried and ripped the sheet after the glue dried, almost a disaster. We just started the whole process from the beginning. Have fun and look for other leaf colors, there are many of them. Let it dry it will be sticky to the touch. Place the sheets of paper over any parts you are covering, then CAREFULLY rub the sheet into the adhesive with a damp, smooth cloth. If you rub the sheet hard, it will tear. Let it dry for about 2 days until it becomes soft. Then, before you cut off the excess sheet, coat it with - Krylon K01303007 11 oz Crystal Clear Acrylic Spray Paint Spray - . Let roast all day. Then gently rub the edges of the sheet with your index finger, hanging over the edges of the covered pieces. It's not as easy as it seems. A friend of mine tried and ripped the sheet after the glue dried, almost a disaster. We just started the whole process from the beginning. Have fun and look for other leaf colors, there are many of them. it looks sticky. Place sheets of paper over any details you are masking, then using a damp, smooth cloth, GENTLY rub the panel into the adhesive. If you rub the sheet hard, it will tear. Let it dry for about 2 days until it becomes soft. Then, before trimming off the excess sheet, coat it with - Krylon K01303007 11 oz. Crystal Clear Acrylic Spray Spray - . Let roast all day. Then gently rub the edges of the sheet with your index finger, hanging over the edges of the covered pieces. It's not as easy as it seems. A friend of mine tried and ripped the sheet after the glue dried, almost a disaster. We just started the whole process from the beginning. Have fun and look for other leaf colors, there are many of them. it looks sticky. Place the sheets of paper over any parts you are covering, then CAREFULLY rub the sheet into the adhesive with a damp, smooth cloth. If you rub the sheet hard, it will tear. Let it dry for about 2 days until it becomes soft. Then, before trimming off the excess sheet, coat it with - Krylon K01303007 11 oz. Crystal Clear Acrylic Spray Spray - . Let roast all day. Then gently rub the edges of the sheet with your index finger, hanging over the edges of the covered pieces. It's not as easy as it seems. A friend of mine tried and ripped the sheet after the glue dried, almost a disaster. We just started the whole process from the beginning. Have fun and look for other leaf colors, there are many of them. smooth cloth GENTLY rub the panel into the adhesive. If you rub the sheet hard, it will tear. Let it dry for about 2 days until it becomes soft. Then, before you trim off the excess sheet, coat it with - Krylon K01303007 11 oz Crystal Clear Acrylic Spray Paint Spray - . Let roast all day. Then gently rub your index finger over the edges of the sheet that hang over the edges of the covered pieces. It's not as easy as it seems. A friend of mine tried and ripped the sheet after the glue dried, almost a disaster. We just started the whole process from the beginning. Have fun and look for other leaf colors, there are many of them. smooth cloth GENTLY rub the panel into the adhesive. If you rub the sheet hard, it will tear. Let it dry for about 2 days until it becomes soft. Then, before trimming off the excess sheet, coat it with - Krylon K01303007 11 oz. Crystal Clear Acrylic Spray Spray - . Let roast all day. Then gently rub your index finger simply along the edges of the sheet that hang over the edges of the covered parts. It's not as easy as it seems. A friend of mine tried and tore the sheet after the glue dried, almost a disaster. We just started the whole process from the beginning. Have fun and look for other leaf colors, there are many of them. Before trimming off the excess sheet, coat with Krylon K01303007 Crystal Clear Acrylic Spray Paint in 11 ounce spray. Let roast all day. Then gently rub your index finger over the edges of the sheet that hang over the edges of the covered pieces. It's not as easy as it seems. A friend of mine tried and ripped the sheet after the glue dried, almost a disaster. We just started the whole process from the beginning. Have fun and look for other leaf colors, there are many of them. before cutting off the excess sheet, Coat with Krylon K01303007 Crystal Clear Acrylic Spray Paint in 11 oz Spray. Let roast all day. Then gently rub your index finger over the edges of the sheet that hang over the edges of the covered pieces. It's not as easy as it seems. A friend of mine tried and ripped the sheet after the glue dried, almost a disaster. We just started the whole process from the beginning. Have fun and look for other leaf colors, there are many of them. A friend of mine tried and ripped the sheet after the glue dried, almost a disaster. We just started the whole process from the beginning. Have fun and look for other leaf colors, there are many of them. A friend of mine tried and tore the sheet, after the glue dried, almost a disaster. We just started the whole process from the beginning. Have fun and look for other leaf colors, there are many of them.