Frequency aggregation starts working with modem firmware version 26. When I bought it, it was 25th and there was no aggregation. How to flash: win box download to the computer, prescribe the desired IP for connection, then: - on the left in the menu, select the "new terminal" item and a dialog box appears in which we write: /interface lte firmware-upgrade lte1 We get the answer: installed: R11e-LTE6_V026 latest: R11e-LTE6_V027 We write further: /interface lte firmware-upgrade lte1 upgrade=yes Next, the firmware is the firmware and reboot. Frequencies are usually set to 3, 7, 20, 38, 8 different operators use different sets. We first install the application, I didn’t find it for the iPhone, on the android there are “cell towers”, if the phone has the same operator as it is planned in the dish, then it will show the base stations. We orient the antenna roughly at them, then we start twisting literally 1mm each and get into the zone of maximum RSRP values, use the Mikrotik application for your phone, there are graphs and it is more convenient to navigate them, then within the maximum RSRP values we find the maximum values SINR = this indicator (signal quality how much / little interference / noise in it) as a rule, it affects the speed much more than the signal strength indicator. We twist the clamps and at this moment the plate may shift a little, pay attention to this.
🔌 CERRXIAN RS232 to Ethernet Serial Device Server - TCP/IP Converter with 1Port DB9 RS232 Serial to Ethernet Connectivity
3 Review
HB-UMLS Sabrent USB 2.0 Hub with 4 Ports and LED Power Switches for Each Port
12 Review
🔌 USR-TCP232-410s: RS232/RS485 Serial to Ethernet Adapter/IP Device Server with DHCP/DNS Support
4 Review