Review on Abatron Wood Restoration Kit - 24oz: LiquidWood Epoxy Wood Hardener/Consolidant (12oz) + WoodEpox Epoxy Wood Filler (12oz) by Wensheng Dunbar

The contractor wanted to charge us $10,000 to replace rotten wood with new wood. I fixed the problem with epoxy for less than $300. Site preparation: Remove rotten wood, cover if necessary if rain is expected next week. Carry out a final check after about a week and remove any new rotten parts. clean area. Product Preparation: If the area to be filled is large/deep, consider soaking a few cotton balls in liquid product and placing them in the hole first. In this case use paste for the outer parts. If not, consider applying/tinting a liquid product first. Immediately after applying the liquid product or cotton swabs, start preparing the paste. You'll need a few minutes to stir the paste, during which time the liquid will begin to thicken. When you apply the paste, the liquid product acts like an adhesive. Work with a small amount of paste at a time. Product Application: Now you should apply a liquid product. Apply a small amount of paste to the area. I recommend roughly shaping the paste to fit the area you want to fill. Keep working in small amounts until done. Finishing: I recommend sanding the dry (after about 24 hours) paste before applying a coat of colour.