Review on Walker 83155 Manifold Converter Calcat by Owen Blanco

Technically suitable for the 2005 Hyundai Elantra year of release . with California emission requirements hardly. On mine, the holes in the bottom flange weren't straight, so the bolts were skewed. Nothing spoils the job, but I had to adjust the bottom gasket to bypass the studs on the manifold. Also, the top right hole is offset by 1/8 inch, so the motor mounting screw doesn't have enough holding power. the same length. The length was approximately 1/4 inch longer than the OEM recycled front heat shield. I had a clear leak where the top right screw was. Tried OEM gasket but same problem. The device was sent without packaging in a box. In the same box were heat shields and gaskets. Luckily the loose manifold didn't noticeably damage my seals, but I suspect not all of them do. Included in delivery: warranty card. 6 heat shield screws. Engine and exhaust side gaskets. Front and rear heat shield. Stud bolts and nuts for connection on the exhaust side.