Review on Mount ONKRON G100 silver by Mateusz Zjc ᠌

As a consequence of this, it is able to carry out the role that it was intended for, albeit not completely. It is possible that it could be improved. Has some pros: Monitor with a 21-inch screen is reliable. In point of fact, as a number of people have written, the paw did not initially hold, but after being readjusted, it started working properly. As was to be expected, this cleared some room on the table. Everything moves easily, there is no play in the major joints, and everything is smooth and soft with the exception of one detail. Concerning him in terms of his inadequacies. Having this drawback: As has been brought up previously, the mount that is attached to the monitor has some backlash in it. Because it is so big, the monitor needs to have its settings changed quite frequently. Vertically, the monitor has a tilt range of two cm across its display. And due to the fact that I also used the second paw to place a laptop on it, the backlash has become a challenge. Because I frequently turn the display, the backlash causes it to adjust itself frequently. The laptop is typically used as a working instrument, and the blowback causes a significant amount of interference. It is not nearly as flexible as it appears in the photographs, despite what may appear to be the case. You will not be able to configure it in such a way that there are no portions that stick out at all. An elbow that projects forward will take up residence in the space that is twenty cm deep behind the monitor. As a result, if you have particular requirements, it is best to verify in advance whether or not it will stand in the location that you desire, as well as support and spin the monitor in the manner that you require. One of the paws does not have a good grip on the table, which is one of the minor details. The second one is appealing for a number of different reasons. There is no obvious indication on where to find the hint for adjusting the stiffness. Taking into account what you can see of her, it appears that she modifies the rigidity in the horizontal plane. You will need to modify it in such a way that she maintains the monitor's weight. In point of fact, this adjustment determines how rigid the structure is in the vertical plane. Simply by twisting it, I came to the realization that this was the case. And I was immediately itching to take it back to the shop, all the while wondering why people bother writing down what options are available. The arrival of one of the paws was accompanied by a shattered monitor mount. That has just been ripped to shreds.