Guys, what can I tell you? ! After the 6400, unsuccessfully scalped, was slowly dying for half a year, I waited for the 8350. The first copy in Hong Kong turned out to be with my mother XP SLI. I must say right away - I have an arctic 240 sandwich, nzxt450, mx4 pasta. Energy savers except for eist turned everything off. I set the avx offset to 200MHz. Voltage at 1.37. and Guys! he took 5000Mhz without problems under all tests! I almost fell! This mother likes to turn up the voltage higher under the turbo power calibration mode and because of this, the voltage on the CPU jumped up to 1.42v and I decided not. I lowered the frequency to 4900Mhz, left the avx bias the same, the voltage was 1.32v (real readings up to 1.34v) and under all tests and games stable operation with a temperature not higher than 80g. Average temperature 70gr. This is awesome, guys! The FPS is stable, the percent works out at 100. And you wait further 8400, which will be the same as mine at 4900MHz, but you will never get pleasure from overclocking! :-))
AMD Phenom II X4 940 💻 Black Edition 3.0GHz AM2+ Processor - Retail
96 Review
Deepcool GAMMAXX 300 CPU cooler, silver/black/blue
166 Review
🌬️ Silent Cooling Power: Dark Rock Pro 4 CPU Cooler with 250W TDP, BK022
134 Review
Unleash High-Performance with AMD Ryzen 5 3600XT Processor & Wraith Spire Cooler
223 Review
Comprehensive 500pcs Laptop Screw Kit Set for 🔩 IBM HP Dell Lenovo Samsung Sony Toshiba Gateway Acer
12 Review
🖥️ Helifouner 450-Piece Computer Standoffs Spacer Screws Kit: Ideal for Hard Drive, Motherboard, Fan, Power Graphics & Computer Cases
10 Review
MacBook Retina 13-inch (A1425, A1502) and 🔩 15-inch (A1398) Bottom Case Screw Set with Pentalobe Screwdriver
11 Review
36-Pack Black Rubber PC CPU/Case Fan Screws/Rivets Set for Computer
11 Review