Review on 🚀 Ultimate Efficiency Unleashed: Creality Station 10 1Inch Dual Band Platform by Drew Poulin

The product has some nice features (first of all it's huge so you can put Elegoo Saturn parts in it and build the board right away) and feels heavy/ well built. I initially had a small problem with the product and contacted support and they were more than willing to help me solve it so it seems they are willing to support their product. Allows you to safely stir large quantities of (flammable) 99% IPA or whatever you choose to wash your prints with. Keep in mind that because it's very large it will take over 2 gallons of IPA to fill it completely if you need to remove the bulk, but you can keep using it. Also note that you will need to modify the buildplate holder if you want it to work with the Elegoo buildplate (but I just drop everything, drop it down and run, no problem). The user interface is easy to use (fast or slow speed for rinsing/curing and setting time/run). Just make sure you don't accidentally run it in cleaning mode when trying to cure your part or it will throw your part off the stove as it spins much faster for the wash cycle. The only thing I can't understand. (and I assume it's a Revain deal?) So they put the package in another huge empty box with no padding, which practically guarantees it bounces around a bit. However, the inner packaging/the actual product was well padded so everything looked good. Overall the parts to clean are a lot easier and so far they've come out really well (I've made engineering parts) and what you're up to in terms of hardware is a very good deal indeed. For engineering prototypes, I've found that when using a resin like ABS, it's best to leave the supports on (except for critical size areas like holes that the items need to fit), cure for 2 minutes, and then break off Support and continue curing to avoid significant deformation.