Review on 🌋 1KG Vulkankraft Printability - Prevents Clogging - Available Now by Michael Vargas

Every 3D printing enthusiast tries new filaments to make sure they don't tangle, hold up well, and give great results. I believe Vulkankraft's Premium Marble PLA Filament hits the mark in all of these categories! It really is an incredibly easy thread to work with, which is always a plus. The coil came well packaged with good tightness. Once I removed the shrink-wrapped protective plastic barrier, I noticed that there was an extra "saran" wrap around the thread, which further increased my overall confidence in their quality control department. After a few small test runs, it was time to print something. it will really benefit from the improved look and feel of PLA marble. We had to go statue! That's why I chose Moai. My print settings were as follows: Printer: PRUSA MK3S+Nozzle: Brass 0.4mm Resolution: 0.2mm printer to place the marble thread. I know that the manufacturer recommends 210°C as the upper range for printing this filament, but I found 215°C to be slightly better at gluing smooth layers in my initial tests compared to 210°C, plus it's generally the de- facto standard or "golden point". PLA. Adhesion to the bed was strong at every pressure. Layering was excellent, with barely visible layer ridges on all of my prints. There was no tension; Simply beautiful print for print! The absolute absence of tangles on the reel with excellent stability and quality, as evidenced by the photos and videos that I have included in my review. I will be looking at other listings and would highly recommend this brand and PLA marble!