Review on 🚽 American Standard 2462 016 020 Elongated Pressure Toilet by Abdalla Galloway

I called Standard before I bought it. They said people are constantly installing commercial toilets in residential buildings. So I ordered this one. We installed it and removed the old one in 20 minutes. It flares up like a rocket taking off. Stop worrying about things clogging the toilet. It was installed in a residential building at the municipal water supply. It operates at around 60psi. A toilet requires at least 25 psi to operate. When you take out your old toilet, turn off the water, flush, and then use a sponge to remove any remaining water. The tank does not have to be removed from above. Just unscrew the nuts from the bolts and pull the whole thing out. Screws that should be 6 inches apart. After checking the specs of this toilet, I learned that the screw holes are 6 inches apart. This is the standard for commercial and residential applications. You need 11" of wall clearance from the center of the toilet main line to the drain. The specs say 12 inches but there is a 2 inch gap between the tank and the wall. I put a wedge on the wall behind the toilet tank to make sure it didn't wobble, given the extra space and knowing kids sometimes go crazy in the bathroom. drainage hole in the bottom. I surrounded it with putty. It works great just using a standard toilet wax ring with this pressure booster toilet. I'm still glad I bought this: the thing didn't clog once, whereas a pretty good regular toilet clogged 2 times a week.