Review on 🎾 Enhance Your Racquetball Game with Python Rubber Grip Replacement by Jason Hinrichs

This rubber grip is not easy to install. Try this: 1) Measure the length of the grip 2) Cut the rubber grip to the desired length on the grip 3) Stretch the rubber grip with two round wooden dowels (the end that goes on the grip first) 4) Lubricate the Grip and the inside of the rubber grip with WD40, Note: The hardest part is getting the rubber grip through the original lip of the grip. Make sure your hands are dry and the rubber grip on the outside is free of oil. 5) Put the small cut end of the rubber grip onto the grip, you may need to use a small screwdriver or something to stretch the rubber to get through. Hump grip 6) When you get over the hump, squeeze the rubber grip on the hump and gradually push or pull the rubber grip onto the grip. Note: Again, make sure your hands are dry and not oily, do not touch the oily handle. and if necessary, when installing handles, you can lubricate the inside of the rubber handle and the handle to facilitate the installation of the handle on the side of the handle. Note: You will be satisfied and happy when you finish because it takes a lot of patience, effort and time. Now there are other methods that others have suggested. If necessary, take a break and try again. Took me 10 minutes to put it on. Much luck.