Review on 🔊 Unleash the Power of the FIAMM 72112 Freeway Blaster LOW Note Horn! by Steven Stager

After placing an order 3 months ago I finally got around to fitting them (this and the corresponding high pitched horn). They are. Are. Noisy. There's no getting around that - I don't need a decibel meter to know that these things are way, way louder than my standard horn. is. One ONLY fits where the standard horn was and I had to find a place to put the other. I was thinking of a longer metal strut. I also thought about mounting it on an aluminum bumper. The spot where I put the second horn is next to the washer fluid reservoir. Please note: You don't need a "people buy that too" relay for this car. You will definitely need to remove the bumper so check out how to do it (tons of videos online and very easy). Then, if you look at the car from the front, the washer fluid reservoir is at the bottom left. There is a screw on the front holding the tank - unscrew it, place the horn bracket UNDER the plastic of the tank so it touches the metal of the car (you need to ground the horn to the metal - very important) and screw she tightens it again. A picture is worth a thousand words, but I didn't have a picture. so you end up with a thousand words instead. There aren't many configurations to put in there so just play around with it until it fits, but I had the horn port facing down to the left. Hope this helps someone. If you have any questions let me know and I can try to help!