Review on Pangda Grommet Eyelets Tool Kit - Grommet Setting Tool and 100 Sets Eyelets with Storage Box (1/2 Inch Diameter, Silver) by Erin Leuenberger

For now, don't worry about the dark metal punch unless you're punching through thicker material. put it aside Take the silver disk with the small center post facing up. Center this post in the middle of where the hub will be on your material. Take the silver rod with the hole facing down and place it on top of the material that is now on this small post. Make sure the post finds a hole in the silver rod through the material. Gently drive the rod through the material. Continue gently tapping until a small hole appears in the material. Take the socket with the attached tube facing up and place it on the silver disk so that the small stud goes through. Place the perforated material on the sleeve, making sure that all of the material neatly surrounds the small tube extension. Put a thin washer going through it and the hose from the bushing onto the material. Put the metal rod back on the small post, down on the thin washer, which now has a small metal tube going through the socket, and gently tap the knot with the rod. Voila! If you lift this bar you will see the perfect hub assembly. Congratulations!