Review on 🔥 Long-lasting Rutland Grapho Glas Woodstove Gasket Rope for Optimal Performance by Mike Goodwin

Worked great on my Lopi. I removed the door, laid it on a workbench and scraped off the old glue and gasket. I then cleaned it well. I lay the gasket dry in the duct and cut it to length. Slightly dampen the pad. I then applied enough glue to the gasket channel, smeared it around the perimeter, and reinstalled the gasket, starting at the bottom corner. Insert the gasket slowly, being careful not to stretch it, extra care is needed in the corners. Once the gasket was in place, I placed a small piece of plywood over the door and carefully turned it over, being careful not to damage the gasket. Once it had the padded side down, I pinched it around the perimeter, applying even pressure. Be careful not to break the glass. I let it dry for the recommended time, reinstalled, and started a HOT fire. Ideal!