Header banner
Revain logoHome Page
Stanislaw Szczesny ᠌ photo
1 Level
341 Review
0 Karma

Review on Deepcool Redhat CPU cooler, white/red/black by Stanislaw Szczesny ᠌

Revainrating 4 out of 5

Good and quality product, but there are flaws.

My RAM won't install I had to put the cooler on the other side Today I'll try to put just a 120mm cooler there, maybe it will help (already installed everything perfectly fit, stuck a 140mm cooler on the front panel of the case) If I had known that it was so huge, I would have taken a slightly smaller model, because it’s really for a super overclock By the way, if the percent has a heat dissipation of less than 95W, you can set it to the passive mode without a cooler IMPORTANT NOTE: Install the cooler in front of two heat pipes, and not one as shown on the website the temperature is different, so I achieved even lower temperatures, it was 66 in stress tests, it became 59max I didn’t have any alternatives for the price of 2.5k, I didn’t want to take the dull dipkul400 at all, although perhaps it would be even better

Pros
  • Cool design, 6 pipes blow out as it should) cooled my 2700x triplet to 64-66g in a stress test, but this is a controversial plus, although for this money a rather cheap model read comment
Cons
  • To install it you need: 1. Find a case where it will fit 2. Take a RAM without radiators (if there is only one die, then there are no problems, but now it is not advisable to take 1 die, because the processors on which you will put this lock likes two-channel mode, and installing RAM from 4 slots in the last two does not give two-channel operation ) 3. Have a rather long screwdriver, because screwing this swing is still a problem The heat pipes are located just super stupidly, the latter do not receive air flow from the word at all.