This device works on the Bernoulli principle. High-velocity air creates a vacuum that draws in brake fluid. The spec says it works at 71psi, but it also works at lower pressures like 55. The real problem with the product description is that it lacks the amount of air needed to create a vacuum. I have a small 6 gallon air compressor that ended up working but had trouble getting the air to flow. According to the compressor spec it's 2.5cfm at 90psi but it can't handle 90psi so I think this bleeder valve is pulling about 3cfm. Even at lower PSI, front braking action was light, closer to the brake pump. But pulling the rear brake is more difficult. So 10 minutes of work for the front and 30 minutes for the back as the hose is longer to pump out more liquid and is also a slow draw.
ABN Brake Drum Tool Kit - 15-Piece Service Brake Kit with Spring Pliers, Brake Spoons, Pad Gauge, Brake Spring Tool
9 Review
JQuad Safety Orange Powder Caliper
9 Review
π§ BMC Universal Vacuum Pump: Handheld Brake Bleeder Kit Ensuring Efficient Auto Service & Food Canning with Brake Bleeding Tester Set
9 Review
π§ Adjustable Engine Cylinder Hone Tool - EWK 1-1/4 to 3-1/2 Inch 3 Stones, Deburring Piston Honer with 220 Grit
9 Review