⚡ ABN L5-50R Connector – 50 Amp Twist Lock Inlet, Locking Power Cord Plug, Locking Power Inlet for 50A 125/250V Review

CONNECT YOUR CABLE: Use your generator, transfer switch, welding equipment, trailer, RV camper power inlet with this ABN Inlet Locking Connector; Designed for use with round jacketed, hard usage cable (S-type); As long as you have a 3-prong male end with the same 50A 125/250VAC configuration, this connector will fit your application. KEEP OUT PESTS: Replace your power cord with this twist lock connector so the cord can be removed and stored without leaving an opening that mice or insects can enter and wreak havoc. SECURELY HOLD CABLE: This connector comes with strain reliefs that mount inside the base of the connector to hold the cable (clamp for the cord). PERFECT SIZE: Approximate measurement across the face is 2 inches (5.1cm); Across the back where the cord enters adds 0.25 inch (2.25 inches / 5.7cm across); Total length is 5.1 inches (13cm). EASY TO USE: Instructions included; Remove housing by loosening face screws and slide over cable (If a weather-resistant boot is used, slide this over the cable before the house); Strip cord outer jacket and each individual conductor to expose the copper wire; Insert all wires into proper color-coded terminal pockets; Tighten terminal screws and strain relief screws; Slide housing over connector body and tighten assembly screws (If weather-resistant boot is used, slide over complete assembly).