🔌 BTF-LIGHTING 2 Pin IP65 Male Female Connector 22AWG 7.87in/20cm Extension Cable for Car, Truck, Boat - Small Size Nut Design - Indoor/Outdoor LED Strip Lights/String Review

I have used these several times to connect to my 2004 Yamaha R6. So far they have been used for the front turn signals and LED daytime running light strips that I have on my headlights, for the rear turn signals and for the rear brake lights. They are very easy to use, make it easy to remove or detach parts and overall this is a very good product!

They do the job but are not very well made. The plastic on the connectors was slightly warped and soft. It took a little effort to get him on the female side. Much harder plastic would have made them much better. There is a gasket that seals when the cap is screwed on. I'm not quite sure yet if they remain waterproof.

So far I've used two of the five to hook up extra lights to the bike. I needed a waterproof plug in case I had to remove my saddlebags. These connections are unscrewed and the bulbs already on the saddlebags can be left there. I used Teflon tape on the threads in addition to the rubber O-ring I already had. So far, so good!

I bought these for an outdoor lighting project. I used them to connect eight LED strips to a central connection point. They fit and close well. The design is good and the product seems to be well made. The cores are nice and easy to solder. The ends of the link fit tightly together and are twisted tightly. I would recommend taking the time to mark the connecting grooves on both ends. They're a little hard to spot and make your life easier when you plug them in. Overall a good product that I…

I have used these connectors on various projects and they work great. However, when I ordered this time, the locking nuts were missing. I emailed the manufacturer and the issue was resolved quickly - excellent customer service. As with any connector, note the maximum current and voltage ratings. What I like about these connectors: * Copper wire (not CCA) has good electrical conductivity and the ends are tinned for easy soldering * Good construction * Various sizes and numbers of conductors are…

Item is OK. Very short wires. Does what it takes. Now I'm not complaining about the product but more about a specific kit I received from Revain Warehouse. Everything was covered with crystallized something. Sugar? Salt? battery acid? It was even in a sealed package. It's a shame that Amazon resells something in this condition. I only had 1 out of 5 couples that could be saved. I would return them all but I had to finish my project and didn't have time to put everything back together just to do

The good news is they are well made and I believe they will be waterproof. Now I test them in frosty winter weather). I have small 4 pin ones. What I don't like are the design flaws: 1) The key that aligns the rotation is very hard to see and doesn't protrude far beyond the pins so you can't just turn the connector until the key clicks. If you do this, you will bend the pin. 2) The o-ring, which should be grabbed (but not grabbed), will fall off if you're not careful and then not waterproof. At