Ultra-Durable Black Steel Foot Pegs for Jeep Wrangler JK & Unlimited - 2pcs in 1pack Review

The footpegs are bigger and stronger than the photos, which is great. It doesn't state that in the product description, but they also fit the CJs I ride.

The footpegs were amazing with one big exception. My Jeep has a 3/8" female door pillar, a swivel bushing and the footpegs are 10mm male. I had to grind down the external threads to install it. Most people would not be able to do this.

First time on my JLU this destroyed the plastic bushings in the hinge hole, they should have come with rubber or aluminum washers to protect them. Now you have to buy new non-original bushings for them and protect the paint for doors when reinstalling them. I wish I had really left it alone.

The thread on the passenger side is messed up, almost doesn't tighten. was my big day removing the jeep doors for the first time. at least on the driver's side. I noticed someone said it rotates 90 degrees, which is definitely important. You look a little stupid. Another issue I noticed is the welds where the pin meets the threaded rod are welded at completely different heights/areas so they look different on each side.

I love clothespins! My 03 TJ only has soft doors. I found the nut on the bottom very handy if you plan on leaving the doors open for long periods of time. However, I rebuild my doors and top every night. I didn't want to keep tightening and loosening them after we've been riding all day. I flattened one end of the threaded bolt just below the door bracket, took a small drill and drilled a hole big enough to put a small coupling pin through. I drilled a hole to keep the new pin from contacting…