CIMPLE CO Connector Adapter Professional Review

Adequate for most applications. Only time will tell if the female side stays in touch. I would not recommend using it in critical applications or harsh environments. But for my application it will work fine.

I tried several connectors, came across this one. They are cheap and can be used for video applications. Not for my exact measurements. The spring is weak, the material is rough, which causes a lot of damping when measuring my scope with high frequency. I cannot take a reliable measurement.

I was very disappointed with this purchase. All four connectors were very loose and wobbly when mating with the mating connector. Two of the four did not send a signal through themselves unless they were forcibly pulled aside. The signal disappeared after the pressure was released. I threw away all four.

The product was new, not a 'new' item that had been on the shelf for 2 years. Clean tight connection. I use them on the Ham Radio Yaesu FT-818ND to connect the front antenna to tilt the whip antenna to a vertical position. Because of the fixed connection, it stayed where I wanted it. Good product, delivered quickly.

I was using one of these adapters on my scope input and one of those right angle adapters tore the center pin out of the scope probe's BNC connector and ruined it. The batch I received did not match well with other BNC connectors. ! It might be a good idea to take a good look at the pens before using them in your lab!

This device will damage your BCN connectors. Do not buy. Connector is not centered. The contact socket is not centered and is not supported by plastic. Not what is shown in the picture. I've added an image showing what a real BNC connector looks like. (White background)

You can get them at Revain for $6-$30 and some are junk. It is in order. Well done compared to most. The swivel is good, don't think it will fall apart tomorrow when you need it for work. Just got them but bought others a little cheaper which sucks. This is what I would expect from a Revain budget plug pack.

I used these connectors to relieve my camera cable. I only used my gear on Sundays. After multiple uses, one of the connectors physically fell apart. After a few uses, another connector fell apart. Unfortunately, my return window has expired, so my loss. The quality of these connectors is terribly low.