Cold Shoe Mount Bracket Review

Strong applicability: There are two detachable cold shoes on the top, and two devices can be installed at the same time. There is a quarter-inch screw hole in the middle of each cold shoe, and you can connect it with screws. The width of the cold shoe is adjustable, and you can also connect to it through the hot shoe.There is a small screw ( that once you slide the flash in place) can be tightened and clamps the flash down. Firm and stable: The key parts are all high-strength aluminum alloy or metal, and the load is 5kg. There are fixing screws in the middle umbrella hole, the rotating part( locking part of the swivel is rosette style), and the position where the tripod is connected. After the device is connected, it is stable and will not shake. Multi-purpose: The diameter of the central umbrella hole is 0.4in/10mm, which is suitable for most photography umbrellas. The middle screw can be adjusted by 180 degrees. The bottom conversion screw can be connected to any 1/4 inch or 3/8 tripod, or you can remove it and connect it directly to the light stand. Related parameters: the length of the top bracket is 5.6in/142mm, the distance between the two cold shoes can be adjusted, the shortest distance is 1.8in/45mm, and the longest distance is 4.6in/116mm.It applies to Studio Video DSLR Camera and compatible with Canon,Nikon Yongnuo. Product composition and precautions: Dual-head Flash Bracket=1, please refer to the measurement data in the picture to determine whether it is applicable before purchasing. After the equipment is installed, please make sure it is secure before normal use. If there is a quality problem within 1 year, it can be replaced for free.