Computer case AeroCool Cylon black Review

The price speaks for itself. I decided to save on the case when I was building a new computer. Burned out, take more expensive ones, if you collect a good assembly, do not be a miser, a miser pays twice.

1 only 1 fan for blowing . you need more installed coolers, at least 4. 2 I don’t have tempered glass on the side panel, but ordinary plastic . when I bought it, it wasn’t written anywhere . 3 more space for hard drives + rubber spacers to dampen vibration.

In general, the case is adequate, very inexpensive and with all the necessary connectors. But it is inconvenient in general and non-functional. But nice and neat.

Honestly, for this money it’s a sin tocomplain, I can only note that the dust is simply unrealistic tocomllect on a transparent wall, it must be treated with antistatic. Thecomoler works generally silently, but it blows mediocrely. So I advise everyone who wants the appearance of the case to be excellent, and wants to spend relatively little money. Here is a link to my channel, where I described thecomponents in detail: ? view_as=subscriber

In general, the case is interesting and for 2500r it would be a good choice if fans were installed in the drain for blowing in, and only one for blowing out.

An excellent case, I threw in 6 coolers for 1600 from Aliexpress, the keyboard mouse from the same place, it turned out to be a gun.

Has pros: The case is beautiful, modern, comfortable, compact, lightweight, excellent front panel, which just influenced the choice of this case. Few of these characteristics, so also the price is quite low)))) Different cons: The only negative is the plastic transparent wall. I would like glass, but that's okay too)

The choice is yours )) Has some pros: Backlight. The lower location of the bp. There is a place for cable management Cooler included. Price. Some cons: Purge. NOT tempered glass (this can be explained by the price) Pretty thin metal (also follows from the price)

Today, sharing my review.Has pros: Nice appearance. Strict design. Ease of assembly. Cons: For the money, an excellent case of a low price segment.

My personal take on this item.Got pros: Beautiful, the front panel has a bunch of useful things. Cons below: It's a little tricky to deal with cables, but you can

The good quality of the case suits me, but I did not expect that the backlight would take up so much space. Otherwise excellent

An honest evaluation begins.Different pros: Nice appearance. Strict design. Ease of assembly. Cons below: For the money, an excellent case of a low price segment.

in my case, it turned out to be inconveniently located front panel outputs, I have a system unit in a special niche of the table and inserting flash drives from above is not convenient

Personally from me, a polite young man explained everything, clarified everything, tested it, brought it in, satisfied with everything, below is a photo of my handsome man! Options Palit Geforse RTX 2060 Amd Ryzen 5 3600 motherboard gigabyte B450M top-end gaming assembly that I found to my heart's content! I recommend!

If the backlight does not work for someone when connected to SATA from the PSU, then try to remove the front part and correct the wiring from the backlight. faced this problem myself. At the moment everything is great! I can generally recommend this case to buy for such a price!

Guys, don’t take it, I don’t recommend it, I took this case together with the component on the matrix, the design looks convenient, I added an additional cooler right away, well, it didn’t save the video card, it warmed up to 80 degrees in games, touched the box, it seemed to be with boiling water, looked at the revolutions of the palit video card coolers nvidia geforse gtx 1660 everything is fine, I tried to lower the graphics the temperature dropped, in general, thank God the mattress did…

I collected a computer for a friend in this case. I didn’t like the case right away: it’s cramped, the metal is thin, the expansion slots are not removed but bite off. The GIGABYTE B450 AORUS PRO motherboard didn't fit in it! I ran into a regular fan, I had to remove it and sculpt it on the top wall. Temperatures reach critical, although it only has 1 video card and 1 ssd. And what will happen if you put 2 cards and add a couple more HDDs. everything will burn to hell, there is simply no…

In general, the purchase is extremely satisfied! Some pros: Good ventilation standard. Spacious but doesn't take up much space. There is an option to put an additional cooler. Built-in jump with several options for glowing on the muzzle of the body. Although I’m not a fan of such things, and I don’t use it, I turned it on when I assembled it to see. Cool))) The gigantic space allows you to put a good water cooling system. Different cons: 1 side - plastic plexiglass. You can see the "guts"…

I took myself white, it is worth pleasing to the eye. Good, not too bright and not disturbing backlight. Installing up to 2x from below 3x in front, 1st on top and 1st behind 120 screws was very pleased, the height of the legs is also probably cm 5, respectively, the dust pulls a little, not on the floor and already good Its pros: Appearance, a small backlight (almost do not use it). Good purge opportunity, put 2 in front 120 one on top one in the back traction is excellent. The presence of all

I collected a config for i5/16GB/240SSD in this case. The Scyte Ninja tower (mini seems) went in perfectly. There were no difficulties with the assembly (maybe because I collect mainly itx Has pros: The price is an ultra budget option. Design - RGB strip right in color :) Functionality: everything is there to assemble a normal modern PC. Easy to assemble - there are hidden cavities for cables, everything is quite well organized. Dust filters - such a price. Its cons: metal thickness This makes…