Cooler Master Master Accessory Vertical Graphics Card Holder Kit V2 + Premium Riser Cable PCI-E 3.0 x16-165mm - Compatible with Standard ATX Chassis – MCA-U000R-KFVK01 Review

Awesome straight GPU mount. Cooler Master has been around for a while and I'm glad a company like this makes products like this. You can tell that it is high quality and well designed compared to traditional cable modules or uplink products. 11 inches long. AIO was Z63 280 in push-pull configuration.)

TLDR: does what it's supposed to, sags a bit, compatibility can be an issue depending on the cable, GPU and case. I stopped using the product, the paper weight is fine. Please note that this is not compatible with all chassis/GPU combinations. Using an Nvidia RTX 3000 series GPU, I had to cut the PCIE splitter out of my case to accommodate the display port cable. If you have a large GPU and a small or medium tower case, note that you may need to bring metal snips. (EVGA FTW ULTRA in NZXT h510)…

Do not use the lift cable that comes with the mount any other lift cable of this lift cable also causes problems the NZXT H100 lift cable and it installs my $5k pc and fires FAST FIRE MY APARTMENT The mount was very well made and held my 3090 very well and looked great up until the moment it caught fire. I plan to contact the cooler master and see if they do anything to fix this. Please do not use vertical cable.

The build quality is excellent, does not affect the temperature and is easy to install. I thought it was broken and only shows up 10% of the time. It turns out that the cable is PCI Gen 3 and my x570 is Gen 4. I also got it to work by changing the PCI slot to Gen 3 in the BIOS settings.

Suitable for Lian Li 011 Danynic. Even with 3 fans on the bottom, there is half an inch of clearance between the vertical cable and the fans. I have a 2080ti FE Before purchasing this GPU, temperatures were around 75 degrees Celsius even with a custom 90% fan curve. After installing and setting the custom fan curve to 70%, the GPU temperature has now dropped to 63C.

Fits Lian Li O11Dynamic Razer Edition. I really don't want to mount my GPU vertically as I've heard too many bad stories about it. But I have a hybrid GPU and the pipe isn't long enough to mount the heatsink sideways, so I decided to mount it vertically. Everything works great and is easy to install. The tempo is even steeper after vertical editing and I have a slightly higher Time Spy score. While this GPU doesn't look very pretty when mounted vertically, I'm very pleased with the performance…

Be sure to check two things regarding compatibility. My case has tabs to support the card as shown in the first picture. This cooler does not have a master mount, so it would not fit in my case. In the second photo you can see that there is no 45 degree cut-out at the top of the bracket. This isn't a problem in my case, but it's a noticeable difference with some PCI brackets, so make sure yours will work with it. I'm not sure why Cooler Master didn't do the little extra work that it requires…

It's hard to find a good vertical GPU mount specifically for the Lian Li 011D Mini. I tried to get them but you can't find them anywhere. I ordered different GPU mounts and this is the first one that came. Simple instructions. Easy to set up. Pros: * Fits great on my Lian Li Mini * Works great with heavy GPUs (I installed it on a Red Devil 6900XT * Easy to set up. Cons: * You lose all your PCIe slots. * You need thin cables because they have to go into your case. Those with big heads will find…