🔌 Enhance Your Workspace with Cosmas 50203FB Black Grommet - Ultimate Cable Management Solution Review

Uniform finish and comfortable weight. I wish it would sit a little tighter after using a 2.5" hole saw, but a bit of caulk should do the trick.

Unfortunately it didn't fit the table I bought (I needed 2⅜ but that was my fault). However, I bought a 2.5" drill press to use on another project. That speaks volumes about their quality, IMHO.

I would avoid this because the hole the cords go through is too small for a standard power cord. About the size of a monitor or television cable. This makes the fork pretty much useless in my opinion. Structure is ok.

I bought these for my desk. They are well made and durable. The matte finish is perfect for minimalist applications where you don't want the case to stand out. Ease of installation. the lid is tight; Unlike the clips used in some grommets, it's all friction based so it takes some force to pull it out, but it's a lot easier to put back on.

Good quality black metal bushing. But as some other reviewers have pointed out, the hole is a little less than 2-1/2 inches. This seems to be the problem that plagues these types of products as I assume they are all made in metric/mm and not inches. To avoid a loose fit I chose a 2-3/8" hole saw which is too small but I slowly widened the hole with a file until tight. If available then 2-7/16". A hole saw is perfect for this product.

Hub works great and looks fantastic. It is well constructed from heavy metal with a very nice finish. The only problem is that when the cap is removed it doesn't stay securely in the hole as the cap has a good secure fit and the force to remove the cap is greater than the force to pull the entire bushing out of the hole. Perhaps the answer would be a slightly smaller hole, as there are what I would call metal ribs under the lip that could secure the sleeve if the hole were a little smaller. I…