Has pros: Inexpensive, nice backlight, secure mount on the processor. Its cons: At full speed it turns into Mi-8, if there is no window for mounting the mount in the wall of the case, you will have to remove your mother.

Pros: Price. Backlight. Attachment to different sockets. Complete set of 1700 socket. Good heat dissipation. Has cons: Slight noise when revs up. The thermal paste in the kit is of average quality, but it is there.

An excellent cooler, I took it for AMD Ryzen 5 5500, the cooler copes with the cooling of such a processor with a bang. I really liked the installation of the cooler, everything is very simple, everything gets up as it should. The quality of materials and assembly of the cooler is simply excellent, nothing backlashes, does not bend from touch. Very happy with the purchase and highly recommend!

Some pros: Works well up to ryzen 5, intel core i5. Cools even hotter processors, but then it's already noisy Different cons: the bearing is inferior in noise and reliability to those from Zalman

For a very long time, I chose a freezer for AMD Ryzen 3600, because. this friend began to play pranks and get very hot, both in tests like bluebench and in games, for example, without a boost mode in the New World game, it consistently showed 86+ degrees. And in the boost it just overheated and cut down. So, I searched, searched, got into 5k+ coolers already. Read reviews. And it was somehow doubtful who wrote what. So, guys, relax your rolls and calmly take this magnificent Deshman cooler for…

I calmly got into the body, the height declared in the characteristics can be trusted. I was surprised that it is very light, because. Judging by the photos, I expected that the mass would be more. If it is important to someone - the LEDs are in the center, not around the perimeter. The temperature on the core i5-2500K does not rise above 60 at 1400 rpm. I can't comment on reliability yet.

Some pros: Cute, neat. 1600at a discount. 180 w. Quiet. Memory does not overlap. Proc. r5 3600 35 degrees idle, 60 under load. 1250 rpm (Aida64) Without overclocking. Cons below: There is none of them. In the old building back to back got up. Although the lid is closed, it means that it is not bad.

Purely for the sake of interest, I did a processor test and went nuts. I did tests in osst, link and park test. Config: i5 11400f , 1660 , 16gb 3200mgh, , b560m pro e, p850w aorus, ssd 980 1tb *Max consumption per cent 150w *Temperature max 90 gr. * mosfets 100g (on radiators, if not, then all 150g will be) *Cores consumed 140w each *Percentage in 100% (i5-11400f, I know that it has a consumption of 65 w, but I have 180w max, done through power unlock on the motherboard) * cores at 4.4 hertz *

I have not connected it yet, because. The computer is still on the way, as I put it all together, I will add a review, because. The cooler was taken on a hot percent, it will immediately be seen under load how it copes with its work Got pros: giant radiator Thermal paste included A protective film at the junction of the processor and the Cooler (probably because the aluminum tubes do not have copper in contact, but copper spray, but this is just guesswork) Good packaging in which even if you…

This is a tower for its price, it was simply given away for nothing. Cools well in demanding non-optimized games 12400F keeps 40 degrees, this is a very excellent indicator, very straight forward. It was easy to put on, a lot of fasteners were given apparently for different sockets plus thermal paste and in general the packaging is very good I recommend it to everyone, and it also shines expensive, and not like cheaper coolers

After reading the comments on reddit, I thought that I would get into nr200p like a glove, but happiness did not happen ( Mother gigabyte z490i aorus ultra, and perhaps because of her, and did not fit. With the cover removed from the radiator (white plastic socket), the mesh panel closes (but right back to back), with glass it does not close at all Be careful, and I'll go look for a white analogue) I will be grateful for the hint in the comments.

Different pros: Very quiet. Bolts and fasteners for several sockets are included. Each in a separate package and signed. With its cons: Attaching a radiator to a mother with an AMD socket is a perversion. A bar with bolts blocks visibility.

Different pros: Quiet, beautiful, what I wanted, I got it)) Well, the equipment is healthy for both Intel and AMD processors / motherboards. Some cons: Thermal paste included xD (It's a quiet horror) Don't even try to use it xD Some kind of clay

It's time to retire Deepcool gammaxx 400 in the classic version, where the snap-on mount for Intel. In one place I saw a similar method of fastening (Intel recommendations, however .). I did not use the fan and thermal paste that came with the kit. MX-4 taxis + 2 turntables from the Snowman. Easy to install, no fuss. In terms of temperatures, it does not lose a single degree to the previous cooler. The Stone I5 10400f feels great. The price tag is a little more than 1300. Took on MSM. The…

In general, there are no complaints. Came very cool packaged, everything is tightly clamped, no damage. Installed easily, works fine, temperatures do not rise above 50. But I also have an i3 12100 processor that does not work at all, it is clamped by a card. The only drawback is that the fan crackles a little, it doesn’t interfere much, because the speakers, sounds and all that, that is, it’s almost inaudible, but what it is, it is. I'll replace it with another one.

Some pros: Easy assembly, reliable fastening, replaceable fan (standard fan with dampers) Different cons: I did not find it, but they say that it can sometimes push the socket.

Has some pros: Fast delivery, the cooler was well packaged delivered without damage Has some cons: No, because I have not used it yet, if there are, I will add a review

When I was assembling a second PC at 10400f, I saved on a cooler, bought it for 130 watts, the cooler seemed to cope, but after 3 months grease leaked, I don’t remember that at least one illuminated propeller on the cooler would leak, in general, I decided to buy a cooler with a large heat dissipation, 180 watts, and no lights. I was pleased with the delivery kit, it has a mount for a socket 1700, if anyone is interested and there are 4 springs for the propeller, you can put your own 4-pin…

Chapaevsky! Very nice cooler with white backlight. For aesthetes only. There is no difference to whom to throw rubbish into the system unit: this cooler or another will stand. And it's important to me. Plus 4 heatpipes and a large heatsink. I took for 1400, it's inexpensive for such a thing. Paired with Steel Legend, where the gray and white design and RGB are just a feast for the eyes.