Create Stunning Office Decor And Jewelry With DOYOLLA'S Large Pyramid Resin Casting Silicone Molds Review

I ordered the large pyramid mold on Sunday and it arrived on Tuesday. There were no instructions included. It appeared to be straight-forward though. The silicone mold was already inserted into the plastic square-shaped holder so I poured the resin directly into the mold. 1) It was very hard to get level. The resin also didn't go into the very tip of the mold and the sides were wonky. 2) After curing, the mold was easily removed from the resin with the exception of one area. After trying a…

It may be because I used a torch on it, but I did tear the first one I bought while demolding. The second was great. I used it a lot and my finished products were awesome! I did have trouble keeping the insert straight, but they still turned out amazing. I have since stopped making the pyramids but would recommend them to someone trying them out. Easy to use if you know about resin.

Remove insert use baby powder on the hard plastic tap out excess, drop insert back in place, then #1 important note, use silicone spray as your release agent. Different resens can stick! Wow, as you can see in the pic's, I added it is very large and can make any size pyramid you desire, nice nonstick insert, again if treated with silicone spray. Any size you want to create, buy it price is perfect. Had to buy again is so nice.

The mold is pretty much a one time use. The mold adhered itself to the resin, was not able to remove resin without mold tearing and coming apart. Product is very defective.

I love this pyramid. I have used it many, many times for my resin & I have never had any problems. The quality is great I highly recommend it. I will definitely buy another. Thanks

I would recommend this one for the price. Worked well, didn't stick, and had a very smooth finish. Just remember that you most likely will have to work in layers with any resin you use, and the tip of the pyramid, is rounded, not sharp. all in all, its a 10/10 would recommend!

Excellent product for resin no problem whatsoever in removing. Don’t believe the negative feedback. My first time making Orgonite and have used five times with no issues. I do spray with silicone spray prior to each use and clean after each use and store to ziplock bag to prevent dust from sticking.

This mold is GREAT! I do not use the silicone insert only the plastic mold part. My resin slips out very easy and clean up is a breeze! Big size gives you many size options to make. I definitely will order another.

I have many other molds and also a release spray. Still having to cut some to get them out. Not this one, it’s great Thanks for attention.

I'm very experienced with resin and can tell you this thing was nothing other than horrible. The first time I used it, it stuck to every side and completely ruined my project. If you've ever used resin you know how much it takes to fill this pyramid and how much was wasted. No lighter or extreme heat was used, and my project was poured in several layers (so it didn't flash cure).

I really like this mold. Limited use for those with allergies! It is much larger then I thought it was going to be and that is perfect! I love it.

Don't forget the silicone release spray before using, helps keep the mold intact and makes the epoxy easily come out. That's my review!

Was really disappointed in this mold. First it was warped. I tried to smooth it into the box as best I could, but still ended up with a warped pyramid. Also, as stated before, the mold struck to my pyramid in two spots. Ended up tearing the silicone, leaving a huge hole. Very very disappointed. First use & it’s ruined.

I really like this mold very sturdy easy to use and clean! Put baby powder between the mold & its stand to make it a bit easier to remove. Use ONLY a heat gun with this mold. TORCHES WILL RUIN IT! For more pictures and videos check out my art page _hearts.desire 7/24 these will be live!

As a jewelry creator, I have a children’s line on my Etsy store & these cute shapes are perfect for this. If you plan to use some as hanging charms, all you have to do is add bails to the backside of these designs & they can be used to make charm bracelets, necklace pendants, and even earrings.

I read directions, reviews tried everything others stated and still the inner mold did not lay smooth to the the outer holder.I tried and ended up with a bit of an uneven pyramid when finished and in one spot color leaked to previous layer below.I probably got a faulty one, as is a nice looking set up.I bought a metal one to use.