In a nutshell, you get the most value for your money with this product. The absolute best return on investment possible. During regular functioning, there is hardly any sound. Some cons: Appearance, despite the fact that this is more of a minor criticism than a serious one. A closed case won't require your attention, so you won't worry about the blue fan.

At first, they strained the fastenings on the clips - WELL, I DON'T LOVE THEM for some reason. Yes, because plastic has little confidence in plastic. The tower weighs 400 something grams. Well, I think everything is pipets - I already bought it. It's a pity for Babosov - if anything. Everything turned out to be excellent. Holds like a dug in! The main thing is that the antennae of the clips completely come out from the back of the motherboard and, of course, the expansion rod itself. This is…

After replacing the standard cooler with an AMD Athlon 64 X2 5200+ (working with 15% overclocking), the idle temperature was 30-32 degrees, at medium loads 38-40, at 100% load it did not rise above 50. Without overclocking (at standard frequencies), with an open case, the processor in idle is 1-2 degrees warmer than room temperature, with a 100% load no warmer than 40a degrees. I put such a cooler on the phenomena of different models and i7 stones everywhere the temperature in the load does not

It was purchased to replace a noisy and not particularly efficient stock cooler for the Intel Core i5-750 (2676 MHz) processor. As a result, the idle temperature dropped from 50-52 degrees to 40-41 degrees, under load from 62-65 to 52-54 degrees. Quite a good result. The computer with the new GAMMAXX300B RET has become much quieter in all operating modes. Until now, the current model can be taken for any medium-performance processor without overclocking.

Got pros: In a nutshell: the most value for your dollar. The absolute best return on investment possible. In regular operation - practically silent. Having these drawbacks: Appearance, despite the fact that this is more of a minor criticism than a serious one. A closed case won't require your attention, so you won't worry about the blue fan.

I stood on the FX-8320 in idle time 30-35g with AIDA64 load, it showed 90g mother, 85g percent (moreover, the radiator was barely warm to the touch, I thought it was installed crookedly, reinstalled 3 times with the replacement of thermal paste with Z3 - zero effect! here the seller gives me what for AMD is normal and I kind of calmed down, but it’s still not a cat scratching my heart. I read a lot of reviews about MOTHER, PROTS, everywhere they write that these processors don’t heat up above…

I bought it back in July 2022 to cool the phenom 1055t and the cooler coped with it, and then a year later I switched to the ryzen 7 2700 and the cooler also coped with it in the drains if you don’t drive the percentage then 44 - 46 degrees calmly, but if you overclock it to 3 .8 MHz for all cores with a voltage of 120225 Volts, then the temperature is already 48-50 degrees, which I also think is very worthy, all temperature measurements were carried out in a ventilated case like the 40th…

No matter how strange it may sound to some, but it keeps the ryzen 7 5800x (undervolting did, at rest about 1.31 volts) Aida64 stress test 10 minutes - 74 degrees, 20 minutes -78 degrees, but the stress on the cache no longer goes away - after 2- 3 minutes overheating. I bought it for a weak computer, but while I'm waiting for an adapter for noctua, I put this one on the ryzen 5800x and was very surprised that it holds it and that amd turns out to be not as hot as they say, if they are…

Copes with the cooling of my i7-8700 (with turbo boost) for more than a year, never noticed overheating, although it is better to put a 400th model on such a processor. Many will like the fasteners, but personally I can’t stand these clips, for me it’s better to get confused with the screws. Top for your money. Its pros: Quiet and self-regulating rotation cooler, relatively small, removes heat well, does not block the RAM slots and processor power connectors, inexpensive, backwards compatible…

Its pros: Great cooler for your money. Pretty quiet and doesn't pick up much dust. Has some cons: Not the most convenient and modern attachment to the motherboard.

COMFORTABLE! 👍 Once in ~ 3-5 months I took it off, wiped the dust, dripped the paste, clack-clack and EVERYTHING 7700 at maximum load became 60-63 ° (in summer. 2 for blowing) and quiet 🤫 He is probably the best in this price👍 All BOBRA and successful shopping 🤟😉 Some pros: 130 watt Ease of installation (thermal paste is already there (click click and that's it :) 4 pin 3 tubes Quiet Some cons: Yes, I xs . For that kind of money (983r) . Found! Not mirror polished

Stands on ryzen 5 3600, checked in Hades, the percentage warmed up to 86 in a stress test, an average of 83 degrees. I play cyberpunk and it heats up to 79%, which is certainly not critical, but not good, and in the future it will come back to haunt. I recommend taking at least Gammax 400 for such a processor. I myself was advised to use it, but I spared the money and saved it. Do not repeat my mistake friends, take care of your CPU.

In general, a very controversial bag from the near segment. One was bought, worked for half a year on the FX-4100 without overclocking, in normal flight. Then the change of platform, AM4, the same bag began to cool the fermented baked milk 2300, the flight was normal again. I decided to assemble another system in reserve, already for myself, on am3 +, on a pebble FX-4100. mother on a 970 giga chipset, and two 4 giga dies of the old Fury Genesis from Kingston. I bought exactly the same bag…

A good cooler, for 1-1.2k must-have. Got pros: - I got up without problems and the on 2022v3 through the adapter ring using AMDshnyh brackets, although this socket is not indicated in the specifications. - Perfectly cools the E5 2678v3 at 800-1000 rpm - Not quiet but not loud - Nice appearance - Easy installation - Price, 1k rub for a 3-pipe tower with a 120mm turntable. - 4 pin Cons below: - It would be possible to specify support for the 2022 socket in the specifications. Although, for this…

The temperature difference compared to the boxed Intel cooler was only five degrees, with a rotation speed of both a thousand revolutions and prolimatech pk3 paste. The noise level at this speed is the same and hardly perceptible. it bends too much, but the fasteners jumped out without stopping when they snapped in. You put two, two pop out and so on endlessly. succeeded. I had to pull the board out of the case. All this usually takes a couple of seconds. It is also impossible to install a…

I probably came across a marriage: it makes noise at any speed (the box one started making noise only under 100% load and then not much.), The idle temperature is 33 - 35 gr., Under 100% load - up to 65.

The cooler copes with its work, in the stress test on Hong Kong 5 5500 the temperature does not rise above 75 degrees. The only downside is the fastening. My advice is to loosen the fasteners on the motherboard and remove the turntable from the radiator, then, although not without problems, it is possible to install this cooler, otherwise there is not an illusory chance to break the motherboard

Indeed, for such a price, you still need to look for such a miracle :) I was lucky to buy it before it disappeared from sale, I stumbled upon it by accident and I liked it. The air comes out completely cold (room temperature) from the processor, but I haven't overclocked it yet (AMD A6 3670K). Its pros: 1) Big fan 120mm 4 pin; 2) 3 copper heat pipes; 3) Nickel-plated radiator with thin fins; 4) Installed exactly in front of the RAM, without blocking its slots; 5) Relatively inexpensive…

So, AMD Atholon X4 860K 3.7 GHz (4 GHz boost). Before that, there was a boxed cooler, in idle time it was 42-45 degrees, in surf 55, in games 70-80. Prots did not overclock, because it was fraught. I live in the south, there is no air conditioner in the room where the computer is, so the air in the room is 27-29 degrees. What I got after installation: Idle 32-35 degrees (with and without overclocking) Aidy stress test - 45 degrees without overclocking and 50 in overclocking Games (Tanks…

The only thing I did not understand is why the surface adjacent to the processor is not smooth, but with obvious recesses near the tubes? The best contact for heat transfer is metal-to-metal and this surface must be polished like a cat's egg. If anyone has an Intel processor, then put the tubes perpendicular to the crystal in the processor, this really helps to increase heat transfer, it’s a pity it won’t work with AMD