Header banner
Revain logoHome Page
๐Ÿ”น diamond porcelain ceramic terrazoo surfaces" - optimized product name: "terrazoo diamond porcelain ceramic surfaces logo

๐Ÿ”น Diamond Porcelain Ceramic Terrazoo Surfaces" - optimized product name: "Terrazoo Diamond Porcelain Ceramic Surfaces Review

3

ยท

Excellent

Revainrating 5 out of 5ย ย 
Ratingย 
5.0
๐Ÿชš Hole Saws & Accessories, ๐Ÿ”ช Cutting Tools

View on AmazonView on ะฏM

Media

(1)
img 1 attached to ๐Ÿ”น Diamond Porcelain Ceramic Terrazoo Surfaces" - optimized product name: "Terrazoo Diamond Porcelain Ceramic Surfaces

Description of ๐Ÿ”น Diamond Porcelain Ceramic Terrazoo Surfaces" - optimized product name: "Terrazoo Diamond Porcelain Ceramic Surfaces

Blazer diamond hole saws for drilling holes in hard porcelain tile, glass tile, ceramic tile, marble, granite, slate, limestone, terrazzo, quartz and any similar materials. Produce clean and accurate holes in minutes with little or no chipping!. May be used for dry or wet drilling. Size is 1" and has a pilot bit in the center. Because this is a top-quality US made product it is backed with a 100% lifetime warranty that also includes free return shipping. If it ever breaks, warps, cracks or shows any sign of a material defect (being used for its intended purpose), or if the bond between the diamond segment and the steel core becomes separated at any time, it will be replaced free of charge!.

Reviews

Global ratings 3
  • 5
    3
  • 4
    0
  • 3
    0
  • 2
    0
  • 1
    0

Type of review

Revainrating 5 out of 5

Optional Soap Dispenser

I used it to punch through a 1-1/8 inch thick engineered stone countertop to add a soap dispenser. The tool worked great. For best results, I recommend wetting the tip with water from time to time to cool it down and also to remove excess buildup. and low revs (300-350) for this type of material.

Pros
  • Create clean, precise holes in minutes with virtually no chipping!
Cons
  • Quick Start Guide

Revainrating 5 out of 5

Light Holes in Granite

Easy to install soap dispenser and air switch. Each hole took 5 minutes through a standard thickness hard surface (probably granite). In fact, it took me longer to build a small reservoir so I could cool myself with water while drilling (which I think helped a lot; I used "clay" for the air conditioning and built a small pond that turned into a sink drains). The center drill helped make a clean outer hole and I removed the center drill once the outer hole was started (removing the center wasโ€ฆ

Pros
  • Can be used for dry or wet drilling.
Cons
  • Very expensive

Revainrating 5 out of 5

Worth the money

Used this bit to cut through a marble kitchen and a quartz kitchen countertop, one for a soap dispenser and one for a fist water filter, I just used some water and a slow speed of about 800rpm and through both Plate cut I liked the center nozzle with ease so I didn't have to make a starter block and once I was about 1/4" down I used a hex wrench, removed the center nozzle and continued with just a 1 1/8 diamond bit alone. Each recommended and the racquet is still like new so it still has a lotโ€ฆ

Pros
  • Blazer diamond drill bit for drilling holes in porcelain, glass tile, ceramic tile, marble, granite, slate, limestone, terrazzo, quartz and similar materials.
Cons
  • was damaged