Header banner
Revain logoHome Page
๐Ÿ”ช disston e0102423 boxed blu mol bi metal blade logo

๐Ÿ”ช Disston E0102423 Boxed Blu Mol Bi Metal Blade Review

3

ยท

Very good

Revainrating 4 out of 5ย ย 
Ratingย 
4.0
๐Ÿชš Hole Saws & Accessories, ๐Ÿ”ช Cutting Tools

View on AmazonView on ะฏM

Media

(4)
img 1 attached to ๐Ÿ”ช Disston E0102423 Boxed Blu Mol Bi Metal Blade
img 2 attached to ๐Ÿ”ช Disston E0102423 Boxed Blu Mol Bi Metal Blade
img 3 attached to ๐Ÿ”ช Disston E0102423 Boxed Blu Mol Bi Metal Blade
img 4 attached to ๐Ÿ”ช Disston E0102423 Boxed Blu Mol Bi Metal Blade

Description of ๐Ÿ”ช Disston E0102423 Boxed Blu Mol Bi Metal Blade

M42 cobalt bi-metal cutting edge provides shock resistant teeth and resists tooth slippage. 4/6 positive tooth configuration allows for fast, smooth cuts and less vibration. 3/16-Inch back plate eliminates need for drive plate. Country of Origin: China.

Reviews

Global ratings 3
  • 5
    1
  • 4
    1
  • 3
    1
  • 2
    0
  • 1
    0

Type of review

Revainrating 4 out of 5

Cut out a nice hole. Didn't quite match my Milwaukee.

Very sharp. Cut out a nice hole. Didn't exactly fit my Milwauke hole saw. I had to slightly enlarge the locking holes on the saw. However, I was able to cut standard 1-7/8" holes perfectly.

Pros
  • 3/16" backplate eliminates the need for a drive plate
Cons
  • Slightly torn

Revainrating 3 out of 5

This is a hole saw. Know its capabilities and limitations and you will be fine.

This is a bi-metal hole saw. no longer. Know what it can and cannot be used for, and expect it to cut only the right material in the right way. It seems reasonably well made and since it's on sale I can't lower the price I paid for it.

Pros
  • M42 bi-metal cobalt cutting edge provides impact resistance and prevents teeth slipping
Cons
  • Unbelievable price

Revainrating 5 out of 5

worked for what I needed but good to test on scrap wood first

49mm x 70mm bore. It was the best I could get without paying $$$ for a special beat. It arrived in a nice box that would be handy to keep in my toolbox and fits the Milwaukee chuck that I use with Milwaukee hole saws. I used it with a drill press (not a drill press) and found I had to stop and slide it out to clear debris to drill through 3/4" of wood stock. As a result, the hole was a little over 50mm. I started out with leftover material for a dry run and that was fine as I had to adjust theโ€ฆ

Pros
  • Positive 4/6 tooth configuration provides fast, smooth cuts and less vibration
Cons
  • Very expensive