🔥 Dorman 621-503 Engine Cooling Fan Assembly for Ford – Enhancing the Performance of Select Models Review

Perfect fit. The only problem I have is how loud the thing is. Very noticeable when switched on. Though cheaper than OEM and appears to be of decent quality.

If you have a 2013 Ford Fiesta this is the one that will work, don't buy any other brand. and likes to blow fuses after one, very quiet and smooth running, buy again, also if you swap your fan and it runs at high rpm all the time, swap it out, it should be good from low to high rpm.

Wife's A/C wouldn't work if she wasn't moving (2011 Ford Fiesta). The mechanic offered $250 to replace this fan. It was VERY easy to switch using the guide in another review. If you have or have access to an elevator, it can be replaced in 20 minutes, even by someone with no mechanical experience. The hardest part was aligning the tabs when installing the new fan.

So my Fiesta had an air conditioning problem which turned out to be engine overheating. Thanks to Ford for assigning a check engine light that doesn't turn on when the car overheats. But. Anyway, it turned out my fan wasn't working so I just assembled the entire assembly and installed it in about 7 minutes and then replaced the blown fuse. Works like a champ. My air conditioning works and as a plus I don't melt my aluminum motor.

I'm surprised this is such a quality product. That works great. Installation: 1) Lift the front of the vehicle and place it on stands. 2) Disconnect the cables attached to the old fan. 3) Disconnect the electrical connections. One on top and one on the fan itself. 4) GENTLY bend the two plastic retaining tabs at the top, then pull on the fan to release it from the bottom brackets. 5) Go under the machine and pull out the old fan. 6) Install the new fan and disconnect the cables.

Fits my 2012 Ford Fiesta perfectly. Works great for a fraction of the price of the original manufacturer junk. The dealer wanted to charge me $250 for the part and another $200 for installation. Installation took less than 15 minutes. You can do this yourself if you can lift the car as it will have to come out below. I found a technician with a cheap hourly rate and got him to do it as I couldn't muster enough. good jacks should be good enough. I only had a jack that came with the car, which…

Item arrived well packaged. The electrical connection of the fan to the car socket adapter was not mounted directly on the fan motor like a genuine OEM part. I had to break the electric latches on the old block. The lower radiator hose must be disconnected to remove the old part and install a new one. I put car tires on the front ramps to raise the front end. The unit installs with little maneuvering to avoid crushing the radiator fins. Install the latch on the electrical connectors and connect

I bought this fan in November 2019. Now in April 2020 it still works great! Even better than the original. It blows harder which makes it a bit louder and I bought it used! It was easy to install, just had to move the top radiator hose because I removed it from the top, but you can also lift the car and take it out from the bottom. The only odd thing is that the fan keeps spinning for about a minute or two after I turn the car off, but my mechanic says it has no ill effects. Feel free to buy…