🔍 Enhanced Dupli-Color BAG100 Truck Bed Coating Spray Gun – Optimize Your Search! Review

I've read a lot of reviews of Herculiner blade sets with lower foam rollers and to get good coverage you had to switch to these more expensive and stronger loop rollers. I couldn't agree more. These rollers were almost useless when spreading material, and after changing the amount of bedding material moved, I did most of the work with the included chip brush. I was afraid to use the videos provided, but the work went so fast I thought it was already screwed up. To my surprise, the foam rollers…

Let me first point out that although this item is advertised as new, it has clearly been used or at least someone has sprayed it to check. I have included photos to show how the jar arrived when I opened the package. That being said I didn't have time to try and return it and wait for a new can so I went ahead and used it. I've never used this particular bedding spray so I can't confirm how long it can hold up against the elements, but I've found that it seems like it takes a few coats to get…

I had a plastic truck body liner that reduced the inside length of the body by two inches. I wanted to use the entire length of the bed. Truck body prepped - washed with Simple Green then wiped down with tape, water and TSP to remove wax and scratch it. All the shine is gone. Rear door removed, groomed and camouflaged. I wiped down the body and tailgate with paint thinner and let them dry. Truck disguised to avoid splashing. I mixed the color with a drill and a long mixer. Then we clean the…

Five stars is not enough. I have read the negative reviews and most make it clear that the instructions were not followed. Do this: 1. Wash with HOT water and lots of cheap dish soap. Specialty cleaning is a waste of money. air dry.2. Scrub, but don't use anything finer than 80 grit sandpaper. Go for heavy scratches and no residual shine. A NOTICE. When reinforcing handrails are first applied with masking tape and then rubbed. Remove the tape before washing in step 3.3. Wash again in step 1.4…