Foammaker 6mm EVA Foam Faux Teak 🚣 Marine Mat: Non-Slip Boat Flooring and Decking Pad Review

The glue is terrible. The product came with a paper backing, mint in places. I should have been back before I cut him. The surface has been prepared and cleaned. The edges are bent, the product is of poor quality. Buy SeaDek, not this fake. Waste of $100.

Very easy to apply, very sticky self-adhesive backing. Make sure you unfold the product and let it lie flat. When twisted after transport, the edges will curl up. Simply cut with a razor blade. Note that the edges are not square/straight.

We received excellent service from the seller and this product is very good. Installation on a boat swim platform is quite labor intensive. If you have patience and a steady hand, you can save a lot of money compared to buying pre-made kits. If you don't have the patience - buy a ready-made set! Good product. I would buy again.

I definitely do not recommend this product. We installed it outside the houseboat and it is not durable at all. It punctures easily, peels off at the edge, and does not weather well. We tried several glues and none worked properly. Photos taken after a year on the boat. I suspect most of the reviews for this product are fake. Do not buy - you will regret it.

I had to return this item because of the color but the seller provided excellent service and took good care of it. A word of caution with these types of flooring: they all say the product has beveled edges, but that is not the case. In addition, the product rolls tight for transport. It's tempting to unroll and line it up. Do not do that; This will separate the plastic release liner from the adhesive and allow the adhesive to dry. Those two things aside, it looks like good quality.

I have bought 16-18 rolls of this seller's product and so far everything has been fine. My complaint concerns two things that have cost me money and time. And we all know when is the right time? My money. The edges are fade trimmed, leaving me with a less-than-useful 2 1/4" front strip/bar costing me 15℅ in material and again. My time. Also, the backing paper has gotten thin. Mo Time is tearing the little streaks and smudges that it's not fun to play with the team anymore it won't come off in…

Not easy to install if you don't have templates. Seems to hold up very well as long as the return window is open and then peels off. After it starts to peel off, the next rain starts tearing them off completely. Support handled it well and refunded the money but now I have half the boat with a new bottom and the other half is peeling off so it's all falling off and I'm spending a lot of money on good things. ***UPDATE*** Right from the start when I removed the gasket I noticed that the paint…

I was originally planning to buy the Sea Deck brand but at $175 a roll I decided to give it a try. Surprisingly very good quality. Nice and dense, the color matched the 8 rolls I bought. Putting it together wasn't an easy task, but once we figured out the best way to create templates and straight cuts, it just got faster and faster with each piece. You absolutely need to have a good straight edge, we also bought very sharp scissors from Home Depot and used a carpet cutter. We used a variety of…