Compete with calm 180. Worked in the forest for 15 years, sawed calm-180. When starting the HUTER BS-45M on a cold press the primer several times (6-8) until the carburetor fills with gasoline, a characteristic sound is heard, then we pull out the air damper, start it, grab it and stall , press the gas handle and start it. I pulled it 5-7 times for the whole operation and started it. Or 10-20 seconds.

Bought it, ran it with no problems. After the first hemp put another chain. The quality of the native chain is weak. After 1 year and 1 month of non-regular use, the oil pump needs to be replaced. But since we don’t have spare parts for such a “rare” device in our city, I waited 2 months. Refurbished but time will tell for how long.

I bought a saw for harvesting firewood for the winter. It copes with this with a bang, I have not tried it for other purposes yet. The work is easy, I can handle it on my own.

This is my first chainsaw. And in general, the first petrol tool. I bought chain oil, semi-synthetic engine oil, 92 gasoline. I dilute 100 ml of oil for 400 ml of gasoline. Everything works as it should. All manipulations were done according to the instructions. Delighted with sawing trees after a hand saw. Sawed firewood and cut down extra trees. Everything is fine)

The saw itself is very good, but the candle that came with it, to be honest, let me down. It's good that there are no problems with buying a new one. And so, in general, the saw is excellent under load, the speed does not sag and does not stall. It can stall if you cut it in weight and at an angle. The assembly itself is excellent, nothing leaks. The chain does not raise questions.

For such little money these days, a pretty decent chainsaw. It does not jump in the hands, with a native chain it easily cuts even hard wood. Then everything will depend on sharpening. A blunt chain starts to burn wood and gets very hot, causing the chain to stretch and need to be tightened. Therefore, sharpen the chain on time and correctly, then there will be no problems.

Bought on the advice of the manager. It satisfies my needs completely. This is just the saw that is needed for the house. And you can make a small repair and clean the garden. I even made my own gazebo with her help. Without a single nail. Pistons are of high quality due to chrome will last a long time. starts easily. The chain is actually worn out a little. I've been using it for almost 2 years though.

We immediately check the tank caps, and into battle. In my saw, the fuel cap was leaking, it took a new gasket to be installed. It starts on a cold one, sometimes from one broach, sometimes from five, but still quickly. The chain stops immediately. And sawing her trees on the site is as easy as shelling pears. In oak 20 cm in diameter enters without obstacles. And does not shake in dense areas.

Approximately such a tool was looking for for household work. In terms of power, you could take even less. Conveniently, no connection to an outlet or charger is required. Perfectly behaves at intensive loadings and in difficult conditions. Breaks rarely. Two years after filling the combustion chamber with a fuel mixture, I changed the spark plug and dried the compartment for a long time with an idle plant. Other breakdowns were generally funny. So with technology, obviously lucky.

I don’t regret the purchase. Although at first there were problems with the launch, I didn’t want to start right away, but in the end it developed and now everything is buzzing with this. Auto-lubrication here occurs automatically; the main thing is not to forget to fill in the oil. It is oil, and not processing, that will increase the resource of the saw. There is also anti-vibration, I won’t say that it’s easier with it, but it’s clearly easier to work with.

The saw was bought for small jobs, so its price (I took it for 4300, also chain oil as a gift) immediately pushed aside eminent and maybe more reliable brands. It is assembled and started according to clear instructions in 2022. It started up for me the first time, I was even surprised after the numerous reviews here about the torment of the first launch. Turned off, tried again - again perfect. Maybe I got lucky. Of course, there is inexpensive plastic and the chain is not ice, but for the…

I've been using the saw for almost 4 years now. Often I forget to drain the gasoline, and yet it starts up after that easily every 3 times. The carburetor tuned the atm itself, everything was easy with respect to 3 bolts. The motor runs stably in it. Cuts through any wood effortlessly. The main thing is not to save on the chain. The tire is normal in length. In general, a good worker.

I bought a saw in the spring for cleaning up the dacha, and sawing firewood. In general, the saw shows itself normally. Starts up without problems. The cord retracts well. It is comfortable to hold in the hands, although the weight is still felt. Sawed wells so thanks to the length of the tire with this there were no problems sawing quickly. The chain keeps sharpening super.

Bought in the village, cut firewood. Clean up dead wood in the garden. A good saw, balanced - the engine does not outweigh. The protective shield is comfortable, the chips do not hit the fingers. The start is easy even in the cold. It usually catches on the second try. The cut is easy, the chain with excellent sharpening. I prepared firewood for the winter with chocks in a week. What I liked - even in a thick damp log it does not stop, it cuts easily!

We were looking for an option in a combination of price and quality. We have been using it in the country for several months. My husband is satisfied.

I took a saw that year, started sawing an apple tree and my native chain became dull almost immediately, I thought that there was not enough power, but as it turned out, the whole thing was in the chain, I had to go for a new one, and after that there were no problems that I didn’t saw only with this saw , has never let me down, there is enough power, light, comfortable, the length of the saw blade is enough. I only advise you to dilute the fuel mixture correctly, buy good oil, do not keep this

In general, the saw is pretty good. They took quite a decent amount of firewood for sawing (one and a half houses for firewood). It works great, but apparently it is not designed for such a large amount of non-stop work. After some time, the handle of the foot broke. There is certainly a weak foundation. Then, after some time, the oil pump was covered (respectively, they were also replaced). In principle, 2 times during this time I took it to MOT (complete cleaning and tuning of the…

Previously, Shtil borrowed from a neighbor to cut firewood, 2 years ago he bought his own saw. Inexpensive but powerful. Logs of 35-40 centimes are sawn, regardless of the density of wood and the temperature outside (up to minus 20 ° sawed). It usually starts easily, but if it has been idle for too long, 6-8 jerks are required. At the neighbor's saw, after every 5-6 cuts, the chain had to be tightened, and on my chain it weakens after 30+ cuts. The chain from the bundle is not bad in quality…

I suffered with the first start, pulled in different variations, but to no avail. It just won't ignite the gas. Gasoline steam comes out of the exhaust, you check with a lighter - it burns, but inside it doesn’t. Went to a neighbor, unscrewed the candle. (regular key bends when trying to unscrew) There is a spark, but weak. We put a candle from steel, there is a better spark. Visually visible. Started to kick a little, better than nothing. One clamps the gas to the maximum with the damper…

The saw was really good. Initially, I used such a model from my father-in-law and, as a result, I wanted to buy it for myself. Unpretentious in operation. I'm glad that the oil does not leak. She certainly cuts powerfully. With any wood copes with a bang. The handle is rubberized and the hand does not slip at all. There is anti-vibration, it also facilitates the work as far as I could notice.