GIDIBII Motorcycle 944 Ignition Switch Housing Alignment Tool | Chopper Cylinder Kit for Harley FLH/T 2014-2020 (Black) Review

I had to remove the ignition from my Street Glide and this tool worked great to align the ignition. Cheaper than analog HD.

I used a well-known brand shop tool and decided to buy my own, the top diameter that fits the switch is too small. A sloppy fit forces you to feel the instrument a bit before it turns on.

The tool works well, the fit was too tight for me who is new to ignition timing so I had to remove the ignition and disassemble but without this tool I couldn't do it. thanks for youtube

Works great. Exactly as described. Not only can you align the components of the ignition housing, but you can also turn on and off and connect accessories without having to reinsert the ignition every time.

This tool is essential if you need to remove the ignition, ie. Harley Mechanic and when I have to work on the front fork I do a lot of fork seals. The covers under the ignition need to be removed and after the forks are in place you need to replace the ignition. , and without this tool Sometimes it's easy, sometimes it takes 20 minutes to set everything up correctly. It takes seconds with this tool.

Working on a bike is relaxing, but when there are problems with the ignition it starts to weigh a little. Anyway, after receiving the alignment tool, it only took me 10 seconds to reset the ignition. This helps with less work manually resetting the ignition in an hour or so. While I won't be using this tool as often as a ratchet, it's always good to have on hand in case I ever need it again.