Black ATV Thumb Warmer Kit - Heat Demon 210008 with Round Rocker Switch for Enhanced Comfort Review

Not bad to install. Take your time, the wires are fine. Be careful of the wire on the ignition side so it doesn't drain the battery if left on.

I've been using Heat Demon products since 2012 and the grip and thumb warmers are the first in the cabin - easy to install and you can combine base (double sided scoop) and power leads to starting heaters for both the thumb and the grip. 2020 Polaris 850SP

This thing is getting hot! I have to keep it low if I don't have gloves or I'll burn my fingers! Easy to install, just make sure you know where you want the button. I will buy another if I ever trade toys. Don't doubt!

I have such a year. They work great and really warm my hands. I'm in Mn so they are always top notch. I want the strap on the steering wheel to be with a ribbon. The keyboard doesn't hold up even when screwed all the way down. And I need to apply superglue to the left handle as it spins. for your information.

Warm, quite hot in fact. I finally got a chance to try it on a recent moose hunt here in Alaska. Warm up quickly and warm up just enough to be uncomfortable. I've found the wheel runs on "high" with them, but switching to "low" after a few minutes has worked best for me. I can't imagine how hot they would be on bare skin (we had gloves of different thicknesses every time we rolled) and even with my thickest gloves they would still be too hot at altitude.

I gave it one star because of the switch. The instructions say swi The instructions say to drill a 13/16 hole for the switch, it didn't fit. I enlarged it to 1/2" undersized, 5/8" undersized, 3/4" undersized. Finally, I used my dremel with a cutting attachment to make a custom hole that was slowly cut and adjusted It took about an hour of my time to install this switch. I'm assuming the switch hole is about 3/4" metric. Before a seller sells an item on Revain, they need to get them to install…