HOMOTEK Privacy Sliding Door Lock With Pull Oil Rubbed Brass- Replace Old Or Damaged Pocket Door Locks Quickly And Easily, 2-3/4”X2-1/2”, For Door Thickness For 1-3/8” Review

I love the way these look and work on my pocket doors. I just renovated and painted all my trim and doors in a dark gray and these really make the pocket doors pop. They were easy to instal and the screw holes matched up perfectly with the old ones. The locks work wonderfully too.

It fit exactly in the existing finger pull slot and we didn’t have to cut the door at all. It was a little tricky lining up the lock latch side of the door jam but we figured it out. The thing works like a charm.

Didn't need a carpenter to install. A few easy cuts with basic tools and a new professional looking locking door handle!

The door lock will not fit if installation instructions are followed. After cut out of the door per instructions the lock mechanism protrudes and will not fully seat. I drilled a 3/4 inch hole 1/4 inch deep 1 inch down from the top of the door cutout. This gave enough relief for the lock to fit in the door and for the locking mechanism to work. A chisel could be used to provide relief also. The lock itself was good. I would have given 5 stars if instructions had been correct. Installation…

Flimsy material, installation you have to mortise out for the strike plate (I consider myself a decent woodworker but don’t have the proper tools for this). The lock only latches if everything is perfect and the twisty knob to do so is very small. If I was redoing this I’d pay a little more and get something better quality

These worked great on all three of my pocket doors. They were an exact fit to what was there previously. These are one piece versus what I took off that was two pieces. I like the one piece design it was very easy to screw in no issues with the fit at all. I bought the flat black color. Would recommend!

Looked everywhere for a matte black sliding door latch, glad we finally found one from Homotek. Installation was easy, maybe 10 minutes from removal of old latch to job done. It fits perfectly and looks great. If I could change one thing, I would make the hand holds slightly deeper but that’s really nitpicking honestly. Great latch!

Fits great and functional. Easy to install and operates well.Though, built quality is not the best, but it meets it’s designed purpose and functionality.I would recommend this product.

Looks fantastic. If you install it correctly, the hardware functions great. Just make sure you cut the right size square in the door and you'll be good.

Good replacement on a 30+ year old pocket door. Overall fit was good-needed to play with it for 20 minutes to get the locking mechanism to work smoothly-disassemble,sanding.,a little drilling,wd40 . And then it worked smoothly.

Our handle broke on our pocket door. Couldn't find one locally. Thank Goodness Revain had it and it fits perfect, Even I was able to install it with no problems.

Perfect replacement, the original was 15 plus years old and use many times per day. The latch lever broke. It took less than 5 mins to take the old one off and place the new one. Perfect fit!

This fit my pocket door perfectly and was a breeze to install. Looks much better than the worn gold color one from 1997 that it replaced!

It’s more of a flat black finish. It was hard for me to install, but that’s because the cut out on the door was done crooked from originally home builder. The finish on the screws started stripping as soon as the screwdriver touched it, and the locking mechanism isn’t "smooth.” It serves it’s purpose and does work, but I’ll probably end up replacing it again later on down the road anyway since it’s not the color I was going for.