Inkjet Printhead Cleaner Printer Cleaning Review

I had a little trouble getting the rubber tip into the large opening of the black ink print head, but once I put it on I was able to get through water. Some of my color ink holes were visibly clogged initially, but after a few syringes filled they worked completely with no visible clogs. I haven't installed it back in the printer yet because I want the water to dry. If this product doesn't get my printer working again, it's not the product's fault - it means there's something wrong with the…

Canon MX922 has printhead problem for some reason. Maybe he doesn't like using third-party cartridges? If you have this printer you WILL definitely have printhead problems and if you don't know how to fix the problem (Error Code 208) you will need to buy a new printer. In this case, pay hundreds of dollars! So yes, if you follow the instructions it will help you practically clean your printhead from scratch and potentially save your printer from a junkyard!

I have used this product with a Canon MX922 and 6821 printhead both connected. 6821 lost his pigmented black head and he cleared up quickly and easily. On the 922 All-in-One, the magenta nozzle was clogged and the black pigmented one was partially clogged. Great instructions led to clean heads the first time. The only reason I gave it 4 stars was that the "hoses" on the syringes were difficult to attach securely to the head connectors. I would buy it again. ps What is "transparency”?

I may be the exception but by following the instructions I definitely cleared a hopelessly clogged PGBK port that I had to deep clean just to get enough ink to flow through. The only thing I found was the instructions, while decent by "non-native verified" standards, they didn't provide enough information on how to use the plunger. I've found with the PGBK connector in particular that the plunger doesn't fit well into the connector unless it's in exactly the right position. If not, only squirt…

worked. My big black tank was full. A few tips: Wear a work shirt. The syringe popped out a few times the first time I wore my "good" KC Chiefs sweatshirt. woman please I ran 6 times. Seemed to work, tried clearing the printer UI which brought everything back up. Run about 15 more times and this time you could see individual nozzles instead of drops. Think of a clogged shower head. So the cleaning solution probably wasn't the full answer, but the syringe. I tried cleaning with 100% isopropyl…

I was very hopeful because a lot of ink came out when cleaning, but as you can see in comparison they are exactly the same. I didn't do it a second time as they recommended because I ordered a replacement. So I used it here because other people have said in the reviews that they need to clean it before it can be used properly. I've done a few cleans and super cleans in the print settings, as well as an enzymatic clean, and the post photo I'm showing was the best I got in the end. You can see…

One of the jets (yellow) on my MX920 was completely clogged. The printer beeped and showed error B200. don't you hate it Does your printer work fine for years and then the POT (Printer Expiration Timer) goes off? Instead of buying another inkjet printer (which we had to do every 4 years) I decided to try this cleaning kit. When it arrived I followed the instructions to soak the printhead. Due to other work I had it was soaked for 18 hours instead of the recommended 8 hours. Then I did the rest…