Description of JIFETOR Pneumatic Vacuum Brake And Clutch Fluid Bleeder Tool Kit - Automotive Brake Caliper Press Tool
PNEUMATIC BRAKE OIL BLEEDING TOOL: This brake bleeder kit is used for changing brake and clutch oil, as well as suck out old oil and air from replaced brake system on motorcycle car truck and pickup. Connect the extractor to the air compressor (American or European type 1/4" air plug) and brake caliper, turn on high power air compressor to 90-120PSI, negative pressure is generated in the braking system to suck out the waste fluid and air, and guide the new oil to fill the whole brake system. AUTOMATIC BRAKE OIL REFILL DEVICE: There is a long screw fittings on 0.8L refill bottle cap, which can work with the master cylinder adapter (4 types: 21 to 30mm, 24 to 32mm, 28 to 37mm, 32 to 41mm) to snap on the mouth of the vehicle's brake fluid reservoir, without hand support. Open the valve on the long screw, the fluid will flow out, and stop once the brake fluid level in the reservoir has been sufficient to cover the threaded port, no need to keep an eye on it. ONE PERSON OPERATION DESIGN: Refill bottle can be held on the brake fluid reservoir. On the 1L waste oil extractor bottle, there is a the hanger which can hook on the engine hood and keep the bottle above the vehicle bleeder valve, also the trigger locker is helpful for hand-free when suck. And you do not need to tread the brake pedal again and again. 1.8M transparent hose is good for monitoring the work situation, with universal black tapered nipple for connecting caliper bleeder valve threads. CONVENIENT TIMESAVING LABORSAVING: Brake repair brake spreading tool adopts 360 degree ratchet design, it is easy to get into place and use from any direction, also your hands will not get fatigued from the constant squeezing. The ratchet is in the centre of the spreader, the two plates keep parallel, make sure to spread the force on the caliper piston evenly, in case of caliper damage or pistons dislocation. Due to ratcheting mechanism, both spreading plates need pressure to start the ratchet. WIDE FITMENT: This brake piston expander is suitable for disc brake system with twin and quad pistons fixed calipers, or single and twin pistons floating calipers. Please note, this ratcheting caliper spreader is designed to "push" the piston back, can not twist and compress at the same time. Also, the distance between the two spreading plates is from 1-1/2" to 2-1/2", may not insert into some smaller caliper. The reversing switch on the ratchet realizes the positive and negative regulation
Hide
