Header banner
Revain logoHome Page
๐Ÿ’ก jiuwu 8 pin double-side prototype pcb adapter for diy soldering & electronic projects - universal board protoboard so msop tssop soic sop8 to dip8 logo

๐Ÿ’ก JIUWU 8 Pin Double-Side Prototype PCB Adapter for DIY Soldering & Electronic Projects - Universal Board Protoboard SO MSOP TSSOP SOIC SOP8 to DIP8 Review

5

ยท

Excellent

Revainrating 5 out of 5ย ย 
Ratingย 
5.0
๐Ÿงฐ Computer Internal Components, ๐Ÿ’ป Computer Components

View on AmazonView on ะฏM

Media

(4)
img 1 attached to ๐Ÿ’ก JIUWU 8 Pin Double-Side Prototype PCB Adapter for DIY Soldering & Electronic Projects - Universal Board Protoboard SO MSOP TSSOP SOIC SOP8 to DIP8
img 2 attached to ๐Ÿ’ก JIUWU 8 Pin Double-Side Prototype PCB Adapter for DIY Soldering & Electronic Projects - Universal Board Protoboard SO MSOP TSSOP SOIC SOP8 to DIP8
img 3 attached to ๐Ÿ’ก JIUWU 8 Pin Double-Side Prototype PCB Adapter for DIY Soldering & Electronic Projects - Universal Board Protoboard SO MSOP TSSOP SOIC SOP8 to DIP8
img 4 attached to ๐Ÿ’ก JIUWU 8 Pin Double-Side Prototype PCB Adapter for DIY Soldering & Electronic Projects - Universal Board Protoboard SO MSOP TSSOP SOIC SOP8 to DIP8

Description of ๐Ÿ’ก JIUWU 8 Pin Double-Side Prototype PCB Adapter for DIY Soldering & Electronic Projects - Universal Board Protoboard SO MSOP TSSOP SOIC SOP8 to DIP8

Made from high quality glass fiber FR4 material, with 1.6mm thickness makes it solid and sturdy. Thickness : approx. 1.6mm; Hole Pitch : approx. 2.54 mm; Dimension : 10.92 x 10.16mm / 0.76 x 0.4inch(L*W). Can be directly inserted in the 8pin IC socket, can also be directly inserted in universal board or breadboard and other experimental board. The board is double-sided, front side is wide, back side is narrow. When confirming that the number of pins is sufficient, the quick check only needs to check the following three dimensions: pin pitch, chip and pad width.

Reviews

Global ratings 5
  • 5
    5
  • 4
    0
  • 3
    0
  • 2
    0
  • 1
    0

Type of review

Revainrating 5 out of 5

Brilliant. Electronics

You are great. However, the solder paste I use seeps under the soic and small tiny balls of solder ooze out of the ends of the soy. To solve this problem, I use a thin silicone strip in the middle between each group of pads, then apply Soic and let it dry for a couple of hours. Then simply use the paste as usual.

Pros
  • Manufactured from high quality 1.6mm thick FR4 fiberglass making it strong and durable.
Cons
  • No gun

Revainrating 5 out of 5

Works great for internal components

Almost half of these have already been used without problems. The only thing to note is that pin 1 is different on each side, which is important if you are installing it upside down. The number 1 printed on the board is sometimes erased during the trimming process, so with some it's not obvious which pin 1 is, but most of them are fine and all are certainly usable. I will definitely buy more when they run out.

Pros
  • Can be directly plugged into the 8-pin IC socket, also can be directly plugged into the universal board or breadboard and other experimentation boards.
Cons
  • Contact seller

Revainrating 5 out of 5

Well made, pre-soldered pads and easy to detach.

Excellent adapter with solder already on the pads. I needed some of these for a tiny 8 pin MSOP device! But I was able to install it on the adapter and solder it to the contact pads. These adapters are easy to detach from the circuit board and look very high quality. They are also of great value.

Pros
  • The board is double-sided, the front is wide and the back is narrow.
Cons
  • Clarity

Revainrating 5 out of 5

Perfect! Suitable for SOIC8 on one side and .

Excellent! Fits both SOIC8 on one side and a smaller mini version on the back. The holes on the sides are perfect for connectors, allowing you to quickly prototype non-DIP chips on a breadboard, then solder them straight away and use this chip in your projects.

Pros
  • Thickness: Approx. 1.6mm; Hole Spacing: Approx. 2.54mm; Size: 10.92 x 10.16mm/0.76 x 0.4inch (L x W).
Cons
  • I vaguely remember

Revainrating 5 out of 5

Excellent quality, good price.

Some of these have been used and are great for breadboard chips that only come in SMD sizes. I would recommend/buy. Liked the black mask.

Pros
  • When confirming that the pin count is sufficient, the quick check only needs to check the following three dimensions: pin spacing, chip, and pad width.
Cons
  • Modernity