LED strip LED SMD 3528 5M With power supply and remote control waterproof RGB IP65 12V Review

LED strip LED SMD 3528 5m RGB (Color) in coil, with controller, remote control and power supply. A distinctive feature of this white LED line model is an extended set of controller and remote control. Color effects and various combinations of alternating blinking and overflows allow you to decorate various surfaces - this is the illumination of buildings, loggias, bathrooms, floors, decorative illumination of wet rooms and much more. This LED strip is moisture resistant (IP65), so it is perfect for street lighting, in places where it interacts with moisture, as well as in showers and pools. Brightness, dynamism and the presence of various color glow effects make this tape an excellent option for drawing attention to a shop window, banner, shop or cafe window. Quite interesting solutions can be achieved in interior design. A big plus is the convenience in installing the LED strip, because it is completely ready for use. Glue has already been applied to the back surface, and all that is needed is to remove the protective film and attach the LED strip to the previously prepared surface. The tape flexibly lays down on a contour of bends and roughness of a surface. You can also cut the tape in multiples of three diodes and solder at your discretion. Using a convenient remote control, you can select various effects: running, smooth, strobe, flickering and blinking alternately, turn the light on and off, change the brightness and colors. Such a light source as the 3528 LED strip boasts efficiency and operation at a voltage of 12 volts. Characteristics: LED type: 3528 Operating voltage: 12V Number of LEDs: 300 pcs. (60 pcs per 1 m) Operating temperature: from -25°С to +70°С Degree of protection: IP65 (waterproof) Luminous flux: 150 lm/m Power consumption (1 meter of tape): 3.6 W Beam angle: 120 degrees Dimensions (length /width/height): 5000 x 8 x 2.5 mm Weight: 180 g. Complete set: LED strip 5 meters in a coil Controller Power adapter 220V (12V, 2A) Remote control with battery Packing/instruction