LED strip with LED RGB remote control, color, 2835, 5 meters, moisture resistant Review

Colored LED strip LED RGB, 2835, 12 V, 5 meters, moisture resistant with an RGB controller and a 220 V power supply. The LED strip consists of modern bright SMD 2835 diodes in red, green or blue. The service life of the tape is more than 50,000 hours. Using a convenient IR remote control, you can turn on and off the LED backlight, change the brightness, select the color scheme and glow mode: static, flash, strobe, attenuation, smooth. The remote control operates at a distance of up to 10 m from the controller''s signal receiver. This diode tape is completely ready for use, has a self-adhesive basis. All that is needed for its installation is to remove the protective film, attach the LED strip with the adhesive side to the previously prepared surface and insert the plug into the socket. If necessary, you can cut the tape in places of special marks and solder at your discretion. This LED strip is moisture resistant (IP65), so it is perfect not only for interior design, but also for street lighting, as well as in showers and pools. Operating rules: 1) When connecting, make sure that the arrows on the plugs look at each other, and the wires are connected by color 2) Pull out the protective film from the remote control 3) Point the remote control at the receiver in the white controller remote control (with battery) Packing: blister