🔧 Enhance Your Craftsman with MARASTAR 21446 2PK 15X6 00 6 Assembly Replacement Review

Wow, how beautiful! I always have to buy hose, install, etc. They came with grommet, hose and air! Just lift the tractor and put them on. Great value, cheapest tires I found were $35 each ($51 for TWO with a tube). Of course it was easy!

Fits snugly on my Husqvarna 48 inch mower. NOTE: The grease nipple is mounted on the same side as the valve stem! Wonderful! Updated 03/17/20. Third wear in a season. Not a good buy. I now have 3 acres. At least twice a month. Sometimes weekly. There is no tread on one tire and almost no tread on the other. I will buy another brand next time.

Perfect for my 17hp YardPro garden tractor. 42" 1999. The included E-clamps and washers/gaskets are the correct size. Zerc fittings are correctly installed and working properly. The sidewalls of the old tires were badly worn, so even with tubes installed and inflated to normal pressure, the front of the mower road was about 3/4 inch lower than with these new tires. Lani's lawn mower powers up and clears our 1 acre yard as it enters its 19th year of service with new front wheels and tires.

Bought these to replace a flat front tire on my Craftsman LT2000 and they seem to be holding up well. The local tractor shop wanted $50 for a tire, so it was a very good deal. The tread is a little narrower than the standard Turfsaver tires my mower had, but I can say my mower has firmer handling without sacrificing balance or ride comfort. They were a little tight on the axle and I had to tap them with a rubber mallet after greasing, but overall they are good tires and I would recommend them.

wonderful product! My master is 10 years old and both front tubeless tires have lost their beads. I found this at a great price and thought it might be worth a try. Holy cow! It took me longer to put together a pair of hand tools than replacing both wheels as an assembly! As advertised, arrived fully inflated in 2 days and back in business in less than 20 minutes! I'm pretty sure I won't have to think about front tires for the next 10 years. I recommend taking a small can of Lucas Heavy Duty…

I bought these new ones for the 2019 season, as of July 2020 they are bare and almost unusable. My first impressions of the product were quite high but since using it I am very disappointed. My original factory tires lasted over 10 years. Unfortunately, using them for a little over a year / less than 2 years is unfortunate. I check the tire pressure every month (approx. every 4th mowing) and leave the mower in the garage. Therefore, the effects of weather/sun and over/under pressure cannot be…

So I've had a lot of problems with my Craftsman t3000 mower tires. Like many others, they are no longer aligned and adjustable. I've had frequent failures with originals as well as OEM replacements. The cost of new tires increased, and I was forced to look for "universal" models. But bad camber became a big problem, wearing out the tires quickly, blistering the wheel hub, and eventually the tires began to loosen as they popped out of the snap ring and/or the bushings bent the hub. After a long…

On my 19.0hp* 42" mower model 917.255810 15x6.00-6" hobby lawnmower front tire. This tire I ordered arrived the next day which was great given the snow was predicted and I use my tractor for plowing.The great thing about this particular pack is that the tire already came with a metal hub.This is very difficult when you watch all the tutorial videos on YouTube.I got a guy 20 minutes watched him struggle with this for a long time and he's done it before. I'm so glad I didn't have to do that step…