🔪 Effortlessly Precise Cutting with the MC17001 Mini Cool Single Cutting Applicator Review

Turnkey, ready to go, air, coolant and you're done. The block is very well built, well above expectations, yes indeed. I plan to buy a second one for the mini grinder. I wish the flexible part was a little longer - another 2 inches would be perfect. This gave me the opportunity to use the MC1700 to make some cool mounts on my mill! Buy this, you won't regret it. Bonus, you can turn off the coolant and only run air when working with water-sensitive parts. I look forward to buying a second one.

Fantastic device! Noga products are never a bad investment. A few quick notes: the siphon is a bit flimsy. My unit is about 1 foot above my coolant reservoir and is struggling to keep the coolant flow consistent. I raised my bottle to the same height or higher and now it works great. Sprinkler length is approximately 10 inches as advertised. But I found that 10 inches isn't that much to work with. It's long enough to give you good flexibility and a decent range of motion, but not enough to get…

The first MC1700 we bought in 2017 has been running great for over a year. Then one day I went to use it and instead of sucking in coolant it was blowing bubbles instead. Air was blown through the coolant line. I checked the injector and air is coming out. Our coolant is always clean, free from chips and the like. I disassembled it and found nothing unusual. Pretty confusing. I reached out to Noga and received several emails with troubleshooting ideas but nothing helped. I mentioned that the…