Moen 4000 Faucet Cartridge: Enhance Your Faucet's Performance with the Ultimate Replacement Part! Review

This part fixed my leaky faucet that was slowly leaking out of the top of the faucet handle. Choice of Style Vanity Kit, Model 26BV782-C215, which includes a Vessel Mixer, Model FS6A0069. It fitted perfectly and resembled the original in every detail, including the "KEROX" name on the top. If you have a 2.5mm allen key and a large adjustable wrench to loosen the lock nut, this job can be done during the commercial break.

Worked well. I couldn't find an exact replacement for our dripping Moen single handle shower faucet. Plummer's solution was to remove the faucet and put in an outer tube! Someone told me about the cartridge and found this one and another similar, but not from Moen. I took a chance and they both worked in my two leaky pipes! No more drips and it only cost me $10 plus installation. It's been over 3 months and he's still going strong.

This was the perfect replacement for a Moen kitchen faucet that started leaking at the base of the faucet rather than the spout as expected. Apparently the three red seals in the photo are more of a problem than the internal valves. The exchange was simple: TURN THE WATER OFF; Remove the faucet handle and cartridge cap. remove the old cartridge; and insert a new cartridge. The two raised plugs on the base of the cartridge make incorrect insertion (almost) impossible. After 6 months the new…

Screwed up, didn't measure what I needed and ordered this cartridge instead of 40mm. All is not lost though, I have five other taps that go with this one. The cartridge seems to be of good quality and my other faucets are still fine after ten years, sooner or later though. I will need it. They're very hard to find in Panama, but that doesn't mean they're not here. You can find anything you want in Panama, but it is very difficult to find it even if you are fluent in Spanish. Who cares? Boquete…

Repairing my Moën kitchen faucet with this item was very easy. All I needed was a pair of pliers and an allen wrench. View every 5 minutes. After I installed the new element, the faucet was still leaking a little. I took it apart again and found that the old gasket (the blue Mickey Mouse thing in the picture) had come loose from the old valve and was still there. Doh! Pulled it out, checked that the new valve still had a seal, put it all back together and it was like new. If you have a leak…

I have several Moen faucets around the house but I was looking for a replacement cartridge for my Pegasus kitchen faucet part number RP20005. When I searched Revain and then a number of other plumbing locations there was no replacement but this part looked very close. It turned out that this cartridge wasn't closing properly, causing leaks around the faucet and cartridge area, but the reason was that the protrusions sticking out of the bottom (where the red rubber seals are) just closed were…