📺 Mount-It! Universal TV Stand Base Replacement for 32-60 inch TVs, 110 lbs Capacity Review

Mount-It! Universal TV Stand VESA Table Mount for LCD/LED/OLED 4K TVs Suitable for 32, 37, 40, 42, 47, 50, 52, 55, 60 TVs, 110 lb capacity (MI-849) Very nice TV with very strong support, actually they are stronger than the originals that came with our other tv, it shakes so much when cats jump on the table that i almost have a heart attack, now cats can jump on the tv with those legs or war over the tv lead and it didn't move at all, I made a great purchase with these legs, I would say I would…

Works, not the best stand. But it works. First off, the tools that come with it are complete rubbish. The alley key is ripped off and the small wrench is just bent. If you don't have your own tools, you're going to be in trouble. After assembly, it will not be square. I had to bend the legs so they were both flush and touching the counter. Now for the good part - they offer you a VERY good selection of screws, washers and gaskets. No problem finding the right mounting material. old saying…

The concept of this mount is great. It was just what I needed for a narrow "table top" as my TV had legs on the ends. My reason for the low rating was that the threaded holes for the legs were filled with the paint/kraft layers used on the product. My first attempt was removing the included soft metal screws. I had to go to my garage and find some metric slotted auto screws that were designed to clear the holes as you screw them in. I also had to saturate the holes with lacquer thinner to…

Only 8 pieces. Should be easy to assemble, right? nope There are four parts, labeled A and four B. You need to figure out which A or B to use by looking at the diagram (they are labeled A1 on the diagram but not on the parts). To be honest, they're pretty easy to tell apart. The first two fitted well, but the other two could not be matched due to poor quality threads for the screws. But that's not the worst. You will receive 12 bags of screws, nuts etc. Unfortunately the diagram does not show…

This stand seems to fit almost any standard TV. It certainly fits neatly and easily into my 32-inch Westinghouse TV. The only issues I encountered were not this manufacturer's fault at all. Let's just say that the person who originally installed the TV on the wall mount did some stupid things to get it to do what it was supposed to. It was an easy task, much more difficult. As I said, the problem is not at all with this product or manufacturer. The parts were easy to put together and there were

Update: I've moved in the meantime and wanted to give an update. Stands are back after I moved and are holding my TV better than ever. My setup has changed a bit though, I now have a Nintendo Switch and Vizio soundbar placed under the TV and the gap is fine (see pic) but the look is a little less attractive than it was when my larger one was loudspeaker blocked him. . However, no complaints! Great product! I am impressed. I used this on a 70lb 60" Vizio TV (model M60-D1) that I recently bought…

The concept of this mount is great. It was just what I needed for a narrow "tabletop" since my TV came with legs on the ends. My reason for the low rating was that the threaded holes for the feet were full of paint/kraft coatings used on the product. My first try was stripping the included soft metal screws. I had to go to my garage and find some metric auto screws that had slots to clean the holes when inserting. I also had to soak the holes in lacquer thinner to soften the coating in the…

There are only 8 pieces. Should be easy to assemble, right? nope. There are four parts, labeled A and four B. You need to figure out which A or B to use from the diagram (they are labeled ie A1 in the diagram but not on the parts). In fairness, they're pretty easy to tell apart. The first two went together well, but the two opposite ones couldn't fit together because the threads for the screws weren't well made at all. But that's not the worst. You will receive 12 bags of screws, Nuts etc…

Update: I've moved and wanted to provide an update. The stands are reassembled after I moved and are holding my TV better than ever. My setup has changed slightly though, I now have a Nintendo Switch and Vizio soundbar sitting under the TV and spacing is fine (see image) but the appearance is a little less attractive than it was at the time my larger speaker was blocking it. Still, no complaints! Great product, I'm delighted. I used this on a 70lb Vizio 60" TV (model M60-D1) that I recently…